Spartan EP Series
Spartan EP lubricants are a family of industrial extreme pressure gear lubricants. They are formulated with high quality mineral oils, which help reduce sludge formation helping to increase oil service life. Spartan EP oils contain a sulphur / phosphorus extreme pressure additive system that gives high load carrying ability and protection against wear. In addition these oils provide strong protection against corrosion of steel and copper containing alloys and resist foaming. Spartan EP oils have good water handling properties so that water rapidly separates from the oil for easy water elimination.
Spartan EP oils can be used in either splash or circulating systems. Spartan EP gear oils are suitable for use wherever industrial gear oil is required. Spartan EP grades are suitable for the lubrication of heavily loaded enclosed gear sets including spur, helical and bevel designs and provide protection in applications where shock loading occurs. Spartan EP may also be used in worm gears where specified. They may also be used for lubrication of plain bearings, and in rolling contact (anti-friction) bearings.
Spartan EP oils enjoy a reputation for quality and consistency, as well as the ability to handle a variety of tough gear applications. They are manufactured with high quality mineral stocks and a specially chosen additive system. Spartan EP lubricants are manufactured under the highest level of quality assurance and control in our modern blending facilities
Spartan EP gear oils offer the following benefits:
Spartan EP gear oils are used in a wide range of industrial spur, helical, bevel and steel-on-steel worm gearing.
Specific applications include:
|Spartan EP Series meets or exceeds the following industry specifications:||Spartan EP 150||Spartan EP 220||Spartan EP 320||Spartan EP 460|
|AGMA 9005-E02 EP||X||X||X||X|
|DIN 51517 CLP||X||X|
|DIN 51517-3: 2009-06||X||X|
|ISO 12925-1 Type CKD||X||X||X|
|ISO 12925-1 Type CKC||X|
|ISO Viscosity Grade||150||220||320||460|
|Viscosity, ASTM D 445|
|mm²/s @ 40ºC||150||220||320||460|
|mm²/s @ 100ºC||14.7||19.0||24.1||30.6|
|Viscosity Index, ASTM D 2270||97||97||97||96|
|Pour Point, ºC, ASTM D 97||-24||-24||-24||-15|
|Flash Point, ºC, ASTM D 92||230||240||240||240|
|Density @15.6 ºC, ASTM D 4052, kg/l||0.89||0.89||0.90||0.90|
|Timken OK Load, ASTM D 2782, lb||65||65||65||65|
|4-Ball EP test, ASTM D 2783,|
|Weld Load, kg||200||250||250||250|
|Load Wear Index, kgf||47||48||48||48|
|FZG Scuffing, DIN 51354, Fail Stage|
|Rust protection, ASTM D 665, Sea Water||Pass||Pass||Pass||Pass|
|Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100ºC||1B||1B||1B||1B|
|Demulsibility, ASTM D 1401, Time to 3ml emulsion, minutes @ 82ºC||30||30||30||30|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office, or via the Internet on http://www.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The ExxonMobil, Mobil logo and Spartan are trademarks of Exxon Mobil Corporation, or one of its subsidiaries Due to continual product research and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly. All products may not be available locally. © 2001 Exxon Mobil Corporation. All rights reserved.
Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.