Mobil Brake Fluid DOT 3 is a high performance hydraulic brake fluid for use in automotive disc, drum and anti-skid brake systems and clutch systems.
Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point, and viscosity at "40º and "100º C. Use Brand approval data with the local filling.
Mobil Brake Fluid DOT 3 is based on polyethylene glycol ether technology to provide a high level of brake and clutch performance in automotive and commercial vehicles. Key features and benefits include:
|Features||Advantages and Potential Benefits|
|High boiling point||Consistent and safe brake performance under high braking pressure|
|Minimum rubber component swell||Reduces leakage and loss of fluid to a minimum|
|Excellent corrosion protection||Improved life and reliability of brake system components|
Mobil Brake Fluid DOT 3 is recommended by ExxonMobil for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance.. ExxonMobil recommendations for use include:
|Mobil Brake Fluid DOT 3 meets or exceeds the requirements of the following industry specifications:|
|FMVSS 116 DOT 3|
|ISO 4925 Class 3|
Based on available information, avoid contact with the skin and eyes. Do not siphon with the mouth. Keep the Brake Fluid container tightly closed. If poisoning occurs, contact a doctor or Poisons Information Centre. If swallowed, and if more than 15 minutes from a hospital, induce vomiting, preferably using Ipecac Syrup APF. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open, flood with water for at least fifteen minutes and see a doctor. The Brake fluid container should not be used for any other purpose. This product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDSs are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design, and Brake Fluid DOT 3 are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.