PrintFind a PDSFind a MSDS

Mobilux EP 2 Moly

Grease

Product Description

Mobilux EP 2 Moly is a premium quality multi-purpose, lithium-base NLGI No 2 grease recommended for general industrial applications. It contains an extreme-pressure additive for increased load-carrying ability. Additionally, it contains molybdenum disulfide (also known as moly and MoS 2), which enhances the anti-friction properties of the grease under boundary lubrication conditions. Mobilux EP 2 Moly is dark gray and has a smooth, buttery texture. It is water resistant, has excellent oxidation and mechanical stability, and protects against corrosion.

Features and Benefits

Molybdenum disulfide offers particular advantages under boundary lubrication conditions, especially where sliding or vibration action pushes the grease away from the contacting surfaces. It provides a measure of protection against fretting and is therefore recommended where this phenomenon is a problem, as in splined shafts, pivot pins, fifth wheels, and other parts subjected to oscillating or sliding motion. Also, where relubrication is infrequent, molybdenum disulfide provides extended lubrication protection.

Mobilux EP 2 Moly multi-purpose grease offers the following features and benefits:


Applications

Mobilux EP 2 Moly is suitable for plain bearings and gears. It also can be used in rolling contact bearings, but is not generally recommended for high-precision rolling contact bearings because of the possibility of molybdenum disulfide building up in the clearances. Mobilux EP 2 Moly has applications in the construction, mining, and farming industries. In off-highway trucks and other vehicles, it provides excellent service in bucket pins, rack and pinion gearing, fifth wheels, steering gears, etc.


Typical Properties

Mobilux EP 2 Moly
NLGI Grade 2
Thickener Type Lithium 12-OH
Color, Visual Dark gray
Base Oil Viscosity, ASTM D 445
cSt @ 40°C 150
Texture Smooth and Buttery
Penetration, ASTM D217 worked, 60x, mm/10 280
Dropping Point, ASTM D 2265, °C (°F) 175 (347)
Oil separation test, ASTM D 1742, % 3
Wheel bearing leakage, ASTM D 1263 104°C (220°F), g 0
Timken OK Load, ASTM D 2509, kg (lb ) 18 (40)
Water Washout, ASTM D 1264 @ 79°C, % 6
Corrosion prevention test, ASTM D 1743 Pass
Molybdenum disulfide, % 3


Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design and Mobilux are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.  

 

Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.