PrintFind a PDSFind a MSDS

Mobil DTE™ 700 Series

Premium Turbine Oils

Product Description

Mobil DTE™ 700 Series lubricants are the latest addition to the Mobil DTE turbine lubricant family of products, long recognized for their high quality and reliability. Mobil DTE 700 Series are Zinc-Free turbine lubricants specifically designed for use in gas and steam turbine applications. Mobil DTE 700 Series lubricants are formulated with carefully selected basestocks and additives, including antioxidants, rust and corrosion inhibitors and anti-foam agents. These components provide outstanding resistance to oxidation and chemical degradation over time. Mobil DTE 700 lubricants exhibit excellent water separability, resistance to emulsion formation and anti-foaming characteristics which provide reliable operation. Their enhanced air release properties are critical for turbine hydraulic control mechanisms.

The performance features of Mobil DTE 700 Series oils translate into excellent equipment protection helping increase turbine operation reliability, enabling reduced downtime and extended oil charge life. Mobil DTE 700 Series performance is evidenced by its ability to meet or exceed a wide range of industry standards and equipment builder specifications for steam and gas turbines used around the world.

 

Features and Benefits

Mobil DTE 700 Series offers the following features and potential benefits:

FeaturesAdvantages and Potential Benefits
Meets or exceeds most major turbine equipment builder specifications and industry specifications (ISO VG 32)Simplifies lubricant selection and application / Assures compliance with equipment builder’s warranty / Minimizes lubricant inventory 
Superior oxidation, chemical and color stabilityDesigned to provide extended oil charge life and help reduce oil purchases and disposal costs
Helps control deposit formation to help reduce filter plugging and equipment fouling for reducing downtime and maintenance costs
High level of turbine system reliability and reduced unscheduled downtime
Excellent water separabilityHelps to insure good lubrication film to protect turbine bearings / Maximizes water removal system efficiency and minimizes oil replacement costs 
Enhanced rust and corrosion protectionPrevents corrosion of critical oil system components for reducing maintenance and prolonging component life
Rapid air release and resistance to foamingPrevents erratic operation and pump cavitation, reducing pump replacement and increasing pump efficiency
Zinc FreeReduces environmental impact

 

Applications

Mobil DTE 700 Series are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include

 

Specifications and Approvals

Mobil DTE 700 Series meets or exceeds the requirements ofMobil DTE 732Mobil DTE 746Mobil DTE 768
ASTM 4304 Rev A Type IXXX
ASTM 4304 Rev A Type IIIXX 
China National Std GB 11120-89 L-TSAXXX
DIN 51515-1: 2010-2XXX
DIN 51515-2: 2010-2XX 
GE GEK-27070X  
GE GEK-28143AXX 
GE GEK 32568 GX  
GE GEK-46506DX  
JIS K-2213 type 2 w/add.XXX
Siemens Industrial Turbomachinery MAT 81 21 01X  
Siemens Industrial Turbomachinery MAT 81 21 02 X 
Siemens Westinghouse PD-55125Z3X  

 

Mobil DTE 700 Series has the following builder approvals:Mobil DTE 732Mobil DTE 746Mobil DTE 768
Alstom Power - HTGD 90117XX 
Siemens Power Generation TLV 9013 04XX 
Siemens Power Generation TLV 9013 05XX 

 

According to ExxonMobil, the DTE 700 Series is of the following quality level:Mobil DTE 732Mobil DTE 746Mobil DTE 768
ISO 8068 L-TGBXXX
ISO 8068 L-TGSBXXX

 

Typical Properties

Mobil DTE 700 Series732746768
ISO VG324668
Viscosity, ASTM D 445   
cSt @ 40 °C304464
cSt @ 100 °C5.56.88.6
Viscosity Index, ASTM D 2270117113110
RPVOT, ASTM D2272, minutes100010001000
TOST, time to 2.0 NN hours, ASTM D943, hours10,00010,0008,000
Neutralization Number,mg/KOH g ASTM D9740.100.100.10
Pour Point, °C, ASTM D 97-30-30-30
Flash Point, °C, ASTM D 92228230242
Density @ 15 °C, kg/l, ASTM D 12980.850.860.87
Foam Sequence I, mL ASTM D8920/00/00/0
Foam Sequence II, mL ASTM D8920/010/00/0
Foam Sequence III, mL ASTM D8920/00/00/0
Air Release, 50 C, mins,ASTM D3427234
Demulsibility, @ 54 °C, time to 3ml emulsion, ASTM D1401, minutes101010
Rust Protection, ASTM 665Bpasspasspass
Copper Corrosion, ASTM D1301B1B1B
FZG Scuffing, ISO 14635-1, A/8.3/90, Fail Stage66 

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office, or via the Internet on http://www.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise. 

12-2014 

Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.