Mobil 1™ Syn Gear Lube LS 75W-140 is a high performance, synthetic, multi-purpose, automotive gear lubricant designed to help meet the highest level performance requirements of many modern passenger vehicles in all types of operating conditions, from mild to severe, including limited slip applications, as well as deliver outstanding power transfer performance. Compared to conventional hypoid gear lubricants, Mobil 1 Syn Gear Lube LS 75W-140 performs exceptionally over a wide range of temperatures. Mobil 1 Syn Gear Lube LS 75W-140 achieves this through a unique proprietary combination of synthetic baseoils and a precisely balanced additive system that helps to deliver optimized viscosity-temperature properties together with the highest level of inherent formulation stability. It also helps to protect against thermal and oxidative degradation, wear and corrosion, viscosity loss associated with premature shearing.
Mobil 1 Syn Gear Lube LS 75W-140 combines wax-free synthesized hydrocarbon base oils and a specially designed extreme-pressure, limited-slip, sulfur-phosphorous additive system to help provide a significantly higher level of performance in rear axles and differentials versus conventional fluids. Greater film strength at higher operating temperatures, reduced fluid friction and significant advantages versus conventional mineral oil formulations. It helps to reduce wear and spalling under the high speed, high torque and high horsepower conditions in many sport utility vehicles, vans, light trucks, and cars. This unique, high technology final drive gear lubricant has demonstrated outstanding performance including long-term friction retention, excellent viscosity stability and improved differential/axle durability and cleanliness. Key features and potential benefits include:
|Features||Advantages and Potential Benefits|
|Exceptional thermal stability and resistance to high temperature oxidation||Helps to extend gear and bearing life due to minimal deposits
Long seal life
Potential extended oil drain/service intervals
|Outstanding protection against low speed/high torque wear and against high speed scoring||Capability to handle some of the severest driving conditions while delivering smooth efficient and reliable performance|
|Exceptional shear stability||Helps to retains viscosity and film strength under severe operating conditions to prevent wear|
|Excellent rust, staining and corrosion protection of copper and its alloys||Helps to reduce wear
Longer component life
|Enhanced frictional properties||Helps to improved fuel economy and reduce operating costs|
|Outstanding low temperature fluidity versus mineral oils||Helps to reduce wear at start up and ease of start up even in arctic conditions|
|Good resistance to foaming||Helps to maintain film strength for reliable lubrication|
|Compatible with typical automotive seals and gaskets||Helps to minimize leakage and reduce contamination|
|Excellent limited-slip performance||Helps to reduce chatter and improve traction|
|Mobil 1 Syn Gear Lube LS meets or exceeds the requirements of the following industry specifications:||75W-140|
|Mobil 1 Syn Gear Lube LS|
|VViscosity (ASTM D445)|
|cSt @ 40ºC||170|
|cst @ 100ºC||24.4|
|Pour Point, ºC (ASTM D97)||-48|
|Flash Point, ºC (ASTM D92)||207|
|Density@15.6 ºC g/ml (ASTM D4052)||0.872|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Mobil , Mobil 1 and the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.