Product Description
DISCONTINUED - The recommended replacement products are Mobil Delvac 1600 Monogrades.
Mobil Delvac 1330, 1340, and 1350 are high performance monograde diesel engine oils formulated from advanced technology base oils and a balanced additive system. They are specifically engineered for performance in intercooled, turbo-charged engines operating under severe on and off-highway conditions. Mobil Delvac 1300 monogrades are used in a wide range of applications where a monograde lubricant is recommended.
Features and Benefits
Features |
Advantages and Potential Benefits |
| Excellent protection against oil thickening, high temperature deposits, sludge build-up, oil degradation and corrosion | Prolonged engine life
Less wear
Excellent protection against ring sticking |
| Extended TBN reserve | Long-term deposit/wear control
Controls formation of acids when using higher sulfur fuels |
Applications
- Naturally aspirated and turbo-charged diesel powered equipment
- On-highway light and heavy-duty trucking
- Off-highway industries including: construction, mining, quarrying, and agriculture
Back to Top
Specifications and Approvals
Mobil Delvac 1300 Monogrades meet the following industry and builder specifications: |
Mobil Delvac 1330 |
Mobil Delvac 1340 |
Mobil Delvac 1350 |
| API CF | X | X | X |
Mobil Delvac 1300 Monogrades are recommended for use in applications requiring: |
Mobil Delvac 1330 |
Mobil Delvac 1340 |
Mobil Delvac 1350 |
| API SF | X | X | X |
| Allison C-4 | X | | |
| MTU Type 2 | X | X | |
Typical Properties
Mobil Delvac 1300 Monogrades |
Mobil Delvac 1330 |
Mobil Delvac 1340 |
Mobil Delvac 1350 |
| SAE Grade | 30 | 40 | 50 |
| Viscosity, ASTM D 445 | | | |
| cSt @ 40ºC | 90 | 132 | 202 |
| cSt @ 100ºC | 11.5 | 14.7 | 19.5 |
| Viscosity Index, ASTM D 2270 | 117 | 112 | 110 |
| Sulfated Ash, wt%, ASTM D 874 | 1.4 | 1.4 | 1.4 |
| Total Base #, mg KOH/g, ASTM D 2896 | 12 | 12 | 12 |
| Pour Point, ºC, ASTM D 97 | -30 | -21 | -18 |
| Flash Point, ºC, ASTM D 92 | 250 | 256 | 290 |
| Density @ 15ºC kg/l, ASTM D 4052 | 0.889 | 0.892 | 0.896 |
Back to Top
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design, and Delvac are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
|
