Search Find an MSDS
Mobil DTE Oil 205 Pdf
Compressor Oil Print View
Product DescriptionFeatures and BenefitsApplicationsTypical PropertiesHealth and Safety 

Product Description

Mobil DTE Oil 205 is a lubricating oil formulated to provide excellent anti-wear and friction-reducing properties for compressor cylinder lubrication as well as protection against rust and corrosion.  Mobil DTE Oil 205 is designed for wet-gas compression and exhibits excellent resistance to washing by water and other entrained liquids.  It resists oxidation and provides effective lubrication at low feed rates, thereby extending operating periods between valve-cleaning intervals.



Features and Benefits

Mobil DTE Oil 205 offers the following benefits:




Features

Advantages and Potential Benefits
Excellent resistance to washing by water and other entrained liquids Extended cylinder, ring, and packing life
Effective lubrication at low feed rates Reduced oil purchases, extended valve rebuild intervals
Good anti-wear and friction reducing Extended ring and packing life properties
Rust and corrosion protection Extended compressor cylinder life
Resists oxidation Reduced discharge valve deposits, extended valve rebuild intervals

Applications

Mobil DTE Oil 205 lubricant is recommended for the cylinder lubrication of reciprocating compressors and special rotary sliding vane compressors in air and inert gas service. It is particularly applicable where wet gas is being compressed. While developed primarily for multistage compressors, its superior qualities will provide benefits in many single- and two-stage compressors operating at higher pressures or discharge temperatures or when compressing wet gas.

Mobil DTE Oil 205 is not designed for use in compressor crankcases, particularly those compressors having high lead bearings, or crankshafts fitted with lead counterweights.

It should not be used when compressing air for breathing.



 
Back to Top



Typical Properties

Mobil DTE Oil 205

Specific Gravity, calc.0.90
Pour Point, °C (°F)-9 (16)
Flash Point, °C (°F), min 282(540)
Viscosity, ASTM D 445 
cSt at 40°C 220
cSt at 100°C19.5




  Back to Top

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet at http://www.msds.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and DTE are trademarks of ExxonMobil Corporation, or one of its subsidiaries.



Exxon Mobil Corporation
3225 Gallows Road
Fairfax, VA 22037
1-800-ASK MOBIL (275-6624)

Due to continual product research and development, the information contained herein is subject to change without notification.
Typical Properties may vary slightly.  This product data sheet is based on global product data sheets for use with products purchased in the U.S.
© 2007 Exxon Mobil Corporation.  All rights reserved.
  ExxonMobil Home   |    Help   |    Sitemap   |    Contact Us   |    Privacy & Legal