|
Information about our lubricants can be found by clicking on the product names
below. If you need to find a Product Data Sheet for a specific
lubricant in another industry, please search
here by product name or product type.
Need a product´s MSDS? Look
here.
Need additional product information?
Contact us.
In order for us to respond to your e-mail question, we need
to collect certain information from you. You will be asked to accept our
Privacy & Legal Terms & Conditions before you can send a question to us. If
you decline, you will not be able to send your question and we will not be
able to answer it.
| |
 | | |
Mobilgear 600 Series
(Oil)
| |
The Mobilgear 600 Series are extra high performance gear oils having
outstanding extreme pressure characteristics and load-carrying properties,
intended for use in all types of enclosed gear drives with circulation or
splash lubrication systems.
Mobilgear 600 Series oils are recommended for industrial spur, helical and
bevel enclosed gears with circulation or splash lubrication, operating at bulk
oil temperatures up to 100ºC.
Mobilgear 600 Series gear oils are used in a very wide variety of applications
in virtually all industrial sectors as well as in marine units. |
|
Mobilgrease XTC
(Grease)
| |
Mobilgrease XTC is an extra high performance product designed for use in high
speed coupling applications.
ExxonMobil research scientists formulated Mobilgrease XTC to meet or exceed
the requirements of modern high-speed gear and grid design couplings including
the AGMA CG-2 and CG-1 specifications.
Based on its outstanding performance, this grease has become the product of
choice for many coupling users. |
|
Mobilux EP 111
(Grease)
| |
Mobilux EP 111 is an extra high performance grease primarily designed for
lubrication of all designs of couplings. |
|
The Synthetic Alternative
Flexible couplings are relatively small in comparison to the equipment they tie together. However, they play a large role in machine reliability. For peak performance, the lubricant used for couplings must be very viscous to withstand high loads induced over small contact areas. Grease is usually the lubricant of choice due to its ease of application and ability to remain in the assembly. Even so, finding the grease that provides for maximum performance can be a challenge, especially in slower-moving applications.
ExxonMobil has responded to this need with an innovative line of ultra-high viscosity synthetic oils and semi-fluid synthetic greases that are oxidation resistant, more thermally stable, and able to maintain their viscosity over wider temperature ranges than mineral oils. When it comes to achieving peak performance and cost savings, the benefits of Mobil synthetic lubricants are clear:
- Better coupling component protection from improved lubricant application
- Longer oil life from high temperature stability
When you need better performance than conventional lubricants can provide, Mobil synthetics are an exceptional solution.
|
Mobilgear SHC 22M, 46M
(Synthetic, Oil)
| |
Mobilgear SHC 22M and 46M are supreme performance ultra high viscosity
synthetic lubricants designed specifically for use in heavily loaded, low
speed gears where boundary lubrication conditions often prevail.
Mobilgear SHC 22M and 46M exceed Falk Corporation's minimum viscosity
requirements for intermittent lubrication of gears - winter and summer grades,
respectively. |
|
Mobilith SHC 100, 220, 460, 007, 1500
(Synthetic, Grease)
| |
Mobilith SHC Series greases are supreme performance products designed for a
wide variety of applications at extremes of temperature.
The Mobilith SHC Series of greases is used in the widest range of
applications, and a broad range of operating temperatures, depending on grade.
Mobilith SHC Series greases have become the products of choice for many users,
in many industries worldwide. |
|
|
| | |
