|
Information about our lubricants can be found by clicking on the product names
below. If you need to find a Product Data Sheet for a specific
lubricant in another industry, please search
here by product name or product type.
Need a product´s MSDS? Look
here.
Need additional product information?
Contact us.
In order for us to respond to your e-mail question, we need
to collect certain information from you. You will be asked to accept our
Privacy & Legal Terms & Conditions before you can send a question to us. If
you decline, you will not be able to send your question and we will not be
able to answer it.
| |
 | | |
Mobilcut 141
| |
Mobilcut 141 is a long-life, biostable, chlorine-free high-performance metal
working fluid. |
|
Mobilcut 231 and 251
| |
Mobilcut 231 and 251 are high-performance, multi-purpose water-soluble,
semi-synthetic cutting fluids.
Mobilcut 231 and 251 are readily emulsifiable in water and form stable
micro-emulsions.
Mobilcut 231 is nitrite, diethanolamine, phenol and chlorine free. |
|
Mobilmet® 402, 404 and 416
(Oil)
| |
Mobilmet 402, Mobilmet 404, and Mobilmet 416 are high performance
mineral-oil-type, non-staining cutting oils.
Mobilmet 402 is a light-coloured, low-odor cutting oil.
Mobilmet 404 oil is primarily a dual- or tri-purpose cutting oil for automatic
screw machine shops.
Mobilmet 416 is a heavy-duty, medium-viscosity, dual- or tri-purpose cutting
oil. |
|
Mobilmet 760 Series
(Oil)
| |
Mobilmet 760 Series are extra high performance oil based cutting oils.
With the benefit of comprehensive development testing using modern machining
equipment, plus extensive customer evaluations, Mobilmet 760 Series products,
have become the products of choice for many machine shops. |
|
Mobilmet Alpha, Sigma, Gamma, Omega
(Oil)
| |
Mobilmet Alpha, Mobilmet Sigma, Mobilmet Gamma, and Mobilmet Omega are high
performance mineral-oil-type active cutting oils incorporating synthesised
additive technology. |
|
Mobilmet CCF Series
(Oil)
| |
Mobilmet CCF Series products are high performance, chlorine-free, oil based
cutting fluids. |
|
Mobilmet Upsilon Series
(Oil)
| |
DISCONTINUED - The recommended replacement products are Mobilmet 402, 404 and
416.
Mobilmet Upsilon, Mobilmet Omicron, and Mobilmet Nu are high performance
mineral-oil-type, non-staining cutting oils. |
|
Vacmul 3 A, 3 D, O3 D
(Oil)
| |
Vacmul 3 A is a non-staining, low-viscosity mineral oil, intended for use as
an EDM fluid or as a light- to moderate-duty honing oil. |
|
Vacmul A 6, 2105
(Oil)
| |
Vacmul A6 was developed for machining higher tensile ferrous and non-ferrous
alloys under heavy duty conditions in turning, tapping, screw cutting and gear
cutting operations, particularly where heavy feed rates at slower cutting
speeds are applied, and it is recommended for the flute grinding of twist
drills.
Vacmul A6 is also suitable as a dual and triple purpose oil.
Vacmul 2105 is primarily recommended as a drill flute grinding oil and for all
arduous form grinding operations.
Vacmul 2105 can be used as a general purpose cutting oil on automatics, gear
cutting and all operations where a non-corrosive oil is required for machining
ferrous and non-ferrous metals. |
|
The Synthetic Alternative
Consider our synthetic product for your cutting fluid needs:
|
Mobilcut 351
(Synthetic)
| |
Mobilcut 351 is a fully biostable, mineral oil-free synthetic metal working
fluid. |
|
|
| | |
