Mobil Delvac MX™ F2 15W-40

Mobil commercial-vehicle-lube , Caribbean

High Performance Diesel Engine Oil

Product Description

Mobil Delvac MX™ F2 15W-40 is a high performance diesel engine oil that helps extend engine life in severe on and off highway applications. The advanced chemistry of these products delivers exceptional performance in both modern, high-output engines including those with Exhaust Gas Recirculation (EGR), as well as older engines operating on either low or high sulfur fuels. As a result, Mobil Delvac MX™ F2 15W-40 meets or exceeds the API CI-4 PLUS service category.

 

Mobil Delvac MX™ F2 15W-40 is recommended by ExxonMobil for use in a wide range of heavy duty applications and operating environments found in the trucking, mining, construction, quarrying, marine and agricultural industries. These products will provide outstanding protection in the most demanding diesel engines of Caterpillar, Cummins, Detroit, Mack, Navistar, Volvo, and others. Mobil Delvac MX™ F2 15W-40 also meets or exceeds the API SL specification for gasoline engines and mixed fleets.

 

The outstanding performance reserve of Mobil Delvac MX™ F2 15W-40 is the result of extensive cooperative development work with major Original Equipment Manufacturers (OEMs) and advanced additive chemistry with patented Trimer technology. These enhancements assure excellent control of oil thickening due to soot build-up and exposure to higher temperatures and provide outstanding resistance to oxidation, corrosion, wear, and high temperature deposits.

 

Features and Benefits

Modern high output diesel engines including those using EGR technology generate higher levels of soot and run at higher temperatures than older, naturally aspirated engines, which significantly increases the demands on engine lubricants. These engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher on the piston bringing the oil film closer to the combustion chamber where higher temperatures increase thermal stress on the lubricant.  Higher fuel injector pressure and retarded timing improve exhaust emission control, but also increase engine temperatures and increase soot loads, including those engines operating with EGR. The key benefits include:

 

Features

Advantages and Potential Benefits

Outstanding thermal and oxidation stability

Reduced low temperature sludge build-up and high temperature deposits

Extended TBN reserves

Improved soot handling and extended drain intervals

Stay-in-grade shear stability

Reduced oil consumption and wear protection Maintains viscosity in severe, high temperature service

Excellent low temperature pumpability

Easier engine start-up and reduced wear

Superb resistance to corrosion

Longer life of critical wear surfaces

 

Applications

Recommended by ExxonMobil for use in:

     •  High performance diesel applications including pre-2007 turbo-charged, low emission engines designs, including those featuring EGR technology

     •  On highway applications operating in both high speed/high load and short haul pick-up/delivery

     •  Off highway applications operating in severe low speed/heavy load conditions

     •  Modern marine high-speed diesel engines, including Caterpillar, Cummins, Volvo, Daihatsu, and Yanmar.

     •  High performance gasoline engines and mixed fleet operators

     •  Diesel-powered equipment from American and Japanese OEMs

     •  On highway heavy duty trucking and off highway including: construction, mining, quarrying, and agriculture

 

Specifications and Approvals

This product has the following approvals:

MACK EO-M PLUS

VOLVO VDS-3

Detroit Detroit Fluids Specification 93K214

DQC II-18

Mack EO-N

MB-Approval 228.3

RENAULT TRUCKS RLD-2

DTFR 15B110

 

This product is recommended for use in applications requiring:

API CG-4

API CF

ACEA E5-02

VOLVO VDS-2

MACK EO-M

MAN M 3275-1

CUMMINS CES 20072

CUMMINS CES 20071

API CF-4

RENAULT TRUCKS RLD

 

This product meets or exceeds the requirements of:

API CI-4 PLUS

API CI-4

API CH-4

API SL

API SJ

Caterpillar ECF-2

Cummins CES 20078

CUMMINS CES 20077

CUMMINS CES 20076

ACEA E7

Caterpillar 1E1867

Ford WSS-M2C171-D

 

Properties and Specifications

Property

 

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

15.3

Density @ 15 C, kg/l, ASTM D4052

0.870

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

110

Flash Point, °C, ASTM D92

223

Viscosity Index, ASTM D2270

145

Pour Point, °C, ASTM D97

-36

Total Base Number, mgKOH/g, ASTM D2896  11 

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

03-2024

ExxonMobil de Colombia S.A.
Calle 90 N° 21-32 , Bogota , Colombia

(571) 628 - 0460

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.