HEAVY DUTY CHAIN OIL
Mobil industrial , Canada
PREMIUM CHAIN SAW LUBRICANT
Product Description
Heavy Duty (HD) Chain Oil is specifically designed for the lubrication of chains and guide bars on modern high-speed chain saws operating under severe conditions. It is recommended for spring, summer and fall over a range of ambient temperatures from -5 °C to +40 °C.
HD Chain Oil can also be used in industrial applications where tacky anti-wear oil is preferred. This includes chain drives and plain bearings.
HD Chain Oil is not recommended as chain saw engine lubricants.
Features and Benefits
| Features | Advantages and Potential Benefits |
| Reduced Wear | Chain, sprocket and guide bar wear is reduced by the special antiwear properties incorporated in the oil |
| Minimized Rust | Rust and corrosion of oil-wetted components is reduced due to the addition of rust inhibitors |
| Reduced Consumption | A tackiness additive reduces "throw-off", lowering oil consumption while maintaining an adequate oil film in spite of higher centrifugal forces and high local temperatures |
| Easy Visibility | A red dye is added to allow easy visual determination of chain lubrication while the saw is operating |
Applications
- Woodcutters working at moderate temperatures (-5°C to 40°C) can select HD Chain Oil
- Industrial applications for chain lubrication on industrial drives
Typical Properties
| HEAVY DUTY CHAIN OIL | |
| Colour | Red |
| Viscosity, cSt @ 40°C | 220 |
| Pour Point, °C max. | -15 |
| Flash Point, °C | 260 |
| Rust Test | Pass |
| Operating Temp Range, °C | |
| Min | -5 |
| Max | 40 |
The values shown above are representative of current production. Some are controlled by manufacturing and performance specifications while others are not. All may vary within modest ranges.
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Note: These products are not controlled under Canadian WHMIS legislation.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
09-2019