Mobil Delvac Modern™ 15W-40 Full Protection V5

Mobil commercial-vehicle-lube , 中国

Synthetic Technology

Product Description

Mobil Delvac Modern™ 15W-40 Full Protection V5 is an synthetic technology extra high performance diesel engine oil that helps extend engine life on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Diesel Particulate Filters (DPFs), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR). Fully backwards compatible, Mobil Delvac Modern™ 15W-40 Full Protection V5 will also deliver the same outstanding performance in conventional engines. It meets or exceeds the requirements of API service classifications CK-4, CJ-4, CI-4 PLUS and CI-4.

 

Features and Benefits

Mobil Delvac Modern™ 15W-40 Full Protection V5  is formulated with optimized base oil and additive technology to provide a strong foundation for oxidation resistance, soot handing and wear control supplemented with reduced sludge formation to help long engine life and extend drain intervals.

 

The key benefits include:

 

Features

Advantages and Potential Benefits

Enhanced soot-viscosity control

Help to maintain engine efficiency, long engine life and long oil life

Outstanding thermal and oxidative stability

Reduced low temperature sludge build-up and high temperature deposits

TBN reserves

Helps to improve corrosion protection and to extend drain intervals

Stay-in-grade shear stability

Helps to maintain viscosity in severe, high temperature service for greater wear protection and long engine life

Outstanding resistance to corrosive and abrasive wear

Long life of critical wear surfaces

Component compatibility

Long gasket, seal and after treatment device (DPF) life

 

Applications

Recommended by ExxonMobil for use in:

     • Heavy duty diesel engines including China V/VI and Euro V/VI modern low emissions vehicles*

     •  On-highway light and heavy-duty trucking

      • Off-highway industries including construction, mining, quarrying, and agriculture.

 

* For detailed lubes requirement and application, please refer to the vehicle service manual

 

Specifications and Approvals

 

This product meets or exceeds the requirements of:

API CK-4

API CJ-4

API CI-4 PLUS

API CI-4

 

Properties and Specifications

Property

 

Grade

SAE 15W-40

Specific Gravity, 15.6 C/15.6 C, ASTM D4052

0.875

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

14.2

Flash Point, Cleveland Open Cup, °C, ASTM D92

225

Pour Point, °C, ASTM D5950

-27

Viscosity Index, ASTM D2270

128

Ash, Sulfated, mass%, ASTM D874

1

Total Base Number, mgKOH/g, ASTM D2896

10

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

112

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2023

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.