Mobil Delvac™ 1 Transmission Fluid 50

Mobil commercial-vehicle-lube , Ecuador

Supreme Performance Transmission Lubricant

Product Description

Mobil Delvac 1™ Transmission Fluid 50 is a fully synthetic, manual transmission lubricant engineered to meet the most demanding extended drain and OEM warranty requirements. It is recommended for year-round lubrication of manual transmissions in light to severe duty on- and off-highway equipment operating in a wide range of environments. Designed to provide maximum protection and extended operating life to heavy duty transmissions, Mobil Delvac 1 Transmission Fluid 50 provides significant advantages over conventional sulphur-phosphorus gear oils, including outstanding high-temperature performance, oxidation stability, wear protection, and corrosion control.

 

It has the same viscosity as most SAE 50 engine oils and SAE 90 gear lubricants at the high end of the temperature-viscosity scale, and because of its inherently high viscosity index, it provides stronger film strength at higher temperatures than conventional oils. Mobil Delvac 1 Transmission Fluid 50 also ensures effective lubrication at below freezing temperatures without channelling.

 

Outstanding performance is confirmed by approval against the Mack TO-A Plus 500,000 mile extended service classification for Mack T300 series manual transmissions. Mobil Delvac 1 Transmission Fluid 50 meets or exceeds the requirements of the API service MT-1 classification and is recommended by ExxonMobil for use in transmissions and gear cases where API Service GL-1 through GL-4 (non-EP) gear protection is required.

 

Features and Benefits

Mobil Delvac 1 Transmission Fluid 50 delivers exceptional performance in today's manual transmissions. The key benefits include:

 

Features

Advantages and Potential Benefits

Excellent load carrying, anti-wear, and EP performance

Extends transmission life and reduces cost of operation

Outstanding protection against deposit formation

Longer seal life, extended drain and service intervals

Maximum protection from corrosion of copper and its alloys

Protects and extends the life of synchronizers

Optimized thermal and oxidation protection

Extends component life and improves efficiency

Exceptional shear stability

Minimizes wear during severe operation

Outstanding low-temperature fluidity

Reduces wear during cold temperatures and improves shifting with quicker starts

Extended drain and service interval capability

Provides lower operating costs and higher productivity

 

Applications

Recommended by ExxonMobil for use in:

     •  Heavy-duty manual transmissions where extended service intervals and warranties are required

     •  Commercial line haul, vocational, off-road, pick-up and delivery, and bus applications

     •  Use as a companion with Mobil Delvac Synthetic Gear Oils in rear axles for maximum component life, service efficiency, and fuel economy improvement

     •  NOT suitable for hypoid gear applications in differentials and final drives, either for topping-off or refills, where API service GL-5, MIL-PRF-2105E or SAE J2360 lubricants are specified

 

Specifications and Approvals

This product has the following approvals:

Navistar, Inc. MPAPS B-6816 Type 1

ZF Freedom Line

Mack TO-A Plus

 

This product is recommended for use in applications requiring:

EATON PS 164 Rev 7

 

This product meets or exceeds the requirements of:

API MT-1

 

Properties and Specifications

Property

 

Grade

SAE 50

Density @ 15 C, kg/l, ASTM D4052

0.86

Flash Point, °C, ASTM D92

221

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

17.5

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

132

Pour Point, °C, ASTM D97

-45

Viscosity Index, ASTM D2270

146

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

03-2023

TERPEL-LUBRICANTES ECUADOR S.A.S.

Av. Joaquin Orrantia 125 y Av. de las Américas, Edificio Solaris, Piso 12, Oficinas 801-812, Guayaquil, Ecuador

Teléfono:  (593) 4-3811980

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.