Mobilgrease™ MB 2

Mobil grease , Hungary

Automotive Grease

Product Description

Mobilgrease MB 2 is a lithium thickened grease for multi purpose applications in commercial and passenger vehicle cars. It is based on mineral oil with a viscosity close to 180 cSt. The product has excellent oxidation stability and very good water resistance. It also offers excellent corrosion protection and good flow properties even at low temperatures.

 

Mobilgrease MB 2 conforms to Mercedes Benz page 267.

 

Mobilgrease MB 2 is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

 

Features and Benefits

Features

Advantages and Potential Benefits

Can be used in a wide variety of automotive applications

Potential to rationalise products

Long service life

Reduced operating costs from lower maintenance costs and economic usage

Good oxidation and thermal stability

Good equipment reliability and availability

Excellent protection against rust and corrosion and resistance to water washout

Enhanced equipment protection and good lubrication even in presence of water

Good pumpability in centralised systems at low temperatures

Optimum reliability

Good mechanical stability even at high shear rate

Longer service intervals

 

Applications

Mobilgrease MB 2 can be used for many automotive applications. It can be used as a single multi purpose grease in fleets, agricultural and construction equipment where MB page 267 specification has been recommended. Mobilgrease MB 2 can also be used in some industrial applications where a non EP grease is suitable. The product has a speed bearing factor of approximately 200,000DmN.

 

Specifications and Approvals

This product has the following builder approvals:

MAN 283 Li-P 2

MB-Approval 267.0

 

This product meets or exceeds the requirements of:

DIN 51825:2004-06 - KP 2 K -30

 

Properties and Specifications

Property

Grade

NLGI 2

Thickener Type

Lithium

Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697

180

Color, Visual

BROWN

Dropping Point, °C, ASTM D2265

>190

Four-Ball Wear Test, Weld Load, N, DIN 51350-4

2600

Oil Separation, 168 h @ 40 C, mass%, DIN 51817

6.5

Flow Pressure @ -30C, mbar, DIN 51805

<1400

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

11-2023
.

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.