UNIREX™ EP 2

Mobil grease , Norway

Grease

Product Description

Unirex™ EP 2 is a premium quality grease that combines advanced lithium complex soap technology and leading edge polymer enrichment technology to provide excellent adhesion, water wash-out resistance, mechanical stability and high temperature performance. Even after prolonged churning with water, Unirex EP 2 retains its consistency, adhesive and rust inhibiting properties. Unirex EP 2 provides good protection against corrosion and provides excellent extreme pressure protection against wear, even under severe shock loading conditions.

 

Unirex EP 2 is particularly useful in applications with severe water contamination. Unirex EP 2 is recommended for use in hand packed or grease gun applications, or in non-critical centralized systems, as well as grid-type flexible couplings, and is particularly suitable for use in vehicle wheel bearings.

 

Features and Benefits

Features

Advantages and Potential Benefits

Formulated using an advanced lithium complex soap thickener

Enables longer grease life at higher temperatures than possible with greases made with most other soap types.

Excellent EP and anti-wear properties

Equipment protection and potential equipment life extension even in severe operating conditions.

Potent corrosion protection

Guarding equipment against rust and corrosion in heavy duty and automotive applications.

Excellent resistance to water washout and spray-off

Uses new polymer technology. This enhances the product's already excellent adhesion tendency and water washout resistance. Ensures proper lubrication and protection even in hostile wet environments.

 

Applications

Unirex EP 2 is an excellent multipurpose grease for heavy-duty service in both Automotive and Industrial applications.  Its excellent water resistance and extreme-pressure protection exceed the performance levels of conventional multi-purpose light-to-medium-duty greases.

 

Unirex EP 2 is particularly well-suited for general purpose anti-friction bearings operating at high temperatures. In addition, its low oil-bleed properties offer a distinct advantage where minimal leakage is critical.

 

Properties and Specifications

Property

Grade

NLGI 2

Thickener Type

Lithium Complex

Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697

220

Color, Visual

Green

Corrosion Prevention, Rating, ASTM D1743

PASS

Dropping Point, °C, ASTM D2265

260 (min)

Four-Ball Extreme Pressure Test, Weld Load, kgf, ASTM D2596

315

Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266

0.47

High-Temperature Wheel Bearing Test, Leakage, g, ASTM D4290

1.3

Oxidation Stability, Pressure Drop, 100 h, kPa, ASTM D942

1

Penetration, 60X, 0.1 mm, ASTM D217

280

Penetration, Change from 60X to 100,000X, 0.1 mm, ASTM D217

30

Thickener, wt%, AMS 1699

Li-Complex + Polymer

Timken OK Load, kg, ASTM D2509

60

Water Sprayoff, 38 C, %, ASTM D4049

30

Water Washout Loss, wt %, ASTM D1264

2.1

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2022

Mobil Oil AS
Drammensveien 149, Postboks 350 Skøyen
N-0213 OSLO

(+47) 22 66 30 30
http://www.mobil.no

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.