Mobil Cylinder Oils

Mobil industrial , Singapore

Gear and Cylinder Oils

Product Description

Mobil Cylinder oils are high performance high viscosity oils designed for use in enclosed worm gears operating at moderate to high speeds and temperatures, and where heavy loads, slow speeds or high temperatures demand high viscosity oils. They are also intended for use in steam engine cylinder applications. They are formulated from high quality base stocks that are resistant to oxidation and thermal degradation, and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. They protect against rust and corrosion and provide good film strength and excellent lubricity and they are resistant to water washout.

 

Mobil 600W™ Cylinder Oil, Mobil 600W™ Super Cylinder Oil and Mobil™ Extra Hecla Super Cylinder Oil are additized to enhance their frictional and load-carrying properties. All four members of the product family are widely used in worm gear applications, couplings and bearings, with viscosity grade depending on operating conditions. In steam applications Mobil 600W Super Cylinder Oil is recommended for saturated and superheated steam up to a temperature of 260ºC. Mobil Extra Hecla Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil Mineral may be used with superheated steam above 260ºC. Mobil Extra Hecla Super Cylinder Oil Mineral has good demulsibility. Mobil Cylinder Oils can be applied both by drip feed cups and force feed mechanical lubricating devices.

 

Features and Benefits

Mobil Cylinder Oils offer the following features and potential benefits:

 

Features

Advantages and Potential Benefits

Excellent film integrity at high temperatures

Excellent equipment protection at high temperatures occasioned by variable load conditions, avoiding unexpected downtime and equipment replacement

Provision of good sealing film round rods and in glands in steam applications

Excellent resistance to deposit formation at high temperatures

Resistant to deposits on areas subject to high spot temperatures, maintaining cleaner systems, requiring less maintenance

Excellent anti-wear and low friction properties

Additized grades give reduced wear

Very good water separation in absence of additives

Non-additized grade gives ready separation from condensate

High quality and built in performance features

Results in fewer unplanned stoppages and reduced maintenance costs

 

Applications

Mobil 600W Cylinder Oil is recommended for the following applications:

     •  The splash lubrication of enclosed worm gears operating at moderate to high speeds and temperatures. (Mobil 600 W Cylinder Oil)

     •  Steam cylinders, couplings, bearings, and break-in of compressor cylinders (Mobil 600 W Cylinder Oil)

     •  Mobil 600W Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil are recommended for the above applications but under higher temperature and load conditions

     •  Mobil Extra Hecla Super Cylinder Mineral is recommended where ready separation from condensate is essential, for example, where exhaust steam is used for process work

     •  Mobil Extra Hecla Super Cylinder Mineral may also be used as a tempering oil for bath temperatures up to 290ºC

 

Properties and Specifications

Property

MOBIL 600 W CYLINDER OIL

MOBIL 600 W SUPER CYLINDER OIL

MOBIL EXTRA HECLA SUPER CYLINDER OIL

MOBIL EXTRA HECLA SUPER CYLINDER OIL MINERAL

Grade

ISO 460

ISO 680

ISO 1000

Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130

1B

1B

1B

1B

Density @ 15.6 C, kg/l, ASTM D4052

0.90

0.91

0.92

0.92

Flash Point, Cleveland Open Cup, °C, ASTM D92

282

282

282

288

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

28.0

30.5

35.8

42

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

375

460

680

1000

Pour Point, °C, ASTM D97

-9

-6

0

3

Viscosity Index, ASTM D2270

95

95

85

80

 

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

01-2023

ExxonMobil Asia Pacific Ltd
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633

+65 6885 8000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.