Unirex™ S 2  

Mobil Industrial, Russia

View  Unirex S 2

Grease

Product Description

Unirex™ S 2 is a lithium complex thickened high-temperature grease, based on a low volatility, synthetic polyol ester fluid, fortified with performance-enhancing additives. It is uniquely suited for high temperature applications, with an upper operating temperature recommendation of 200º C / 392°F based upon ASTM D3336 performance. Additionally this grease possesses good oxidation stability, and rust preventive characteristics.

 

Features and Potential Benefits

Unirex S 2 grease is specially developed for high temperature applications where mineral oil based greases may not provide adequate protection. The ester base fluid has a low volatility at the working temperatures involved, this can lead to long grease life when compared to a conventional mineral oil product. Unirex S 2 is suitable for high temperature operations where frequent relubrication is not practical.

This product offers the following performance features:

  • Outstanding high-temperature performance with better lubricity and wear protection than conventional grease
  • Low base stock volatility helping to provide long lubricant life and potentially extend re-lubrication intervals.
  • An upper operating temperature of 200º C /392°F based upon ASTM D3336 High Temperature Life performance

 

Applications

Application notes: The ester base oil of Unirex S 2 is not compatible with many common elastomer seal materials. For example, it may cause a softening or swelling of NBR seals. It is recommended that the equipment manufacturer or your ExxonMobil representative be consulted regarding seal compatibility in a specific application.

Unirex S 2 is recommended by ExxonMobil for severe applications including:

  • Conveyor bearings in kilns and ovens
  • Steel mill ladle bearings
  • Jet aircraft starter clutch assemblies
  • Critical oven bearings in Fiberglas manufacture

 

Typical Properties

PropertyUnirex S 2
NLGI Grade2
Thickener TypeLi-complex
Color, visualOrange/Brown
Worked Penetration,, ASTM D 217, mm/10280
Dropping Point ASTM D 2265, ºC280
4-Ball Wear, scar diameter, ASTM D 2266, mm0.60
Viscosity of Base Oil at 40 ºC, ASTM D 445, cSt170
Oil Separation, ASTM D 1742, mass %3
Lubrication life at 204 ºC, ASTM D 3336, hours500
Corrosion Prevention, ASTM D 1743, RatingPass
4-Ball Weld Load, ASTM D 2596, Kg160

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.






All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

Mobil Oil Lubricants LLC : 123242, Moscow, Novinsky boulevard, 31, Russia

+ 7 (095) 232 22 23


Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.



Loading...