Mobil DTE™ PM Series  

Industrial Mobil, Canada

View the  Mobil DTE PM Series

Paper Machine Lubricants

Product Description

Mobil DTE™ PM Series products are high-quality, high-performance lubricants specifically designed for demanding industrial paper machine circulating systems. They are engineered to provide exceptional lubrication qualities while protecting system components from rust and corrosion. This is particularly important in the wet-end where water and chemical contaminants can enter the lubrication system. The Mobil DTE PM Series oils are formulated to provide maximum protection of gears and bearings operating under severe conditions. They exhibit good viscosity characteristics allowing reduced start-up to production times while maintaining excellent viscosity characteristics at high temperatures. The DTE PM Series oils provide excellent resistance to oxidation and thermal degradation, exceptional protection against rust and corrosion, and a high level of anti-wear performance.



Mobil DTE PM Series oils are formulated with select high-quality base oils and a proprietary advanced technology additive system carefully balanced to attain high performance standards. These fluids permit the use of high steam pressures, temperatures and machine speeds common in high output paper machines. Their outstanding demulsibility and filterability assure excellent performance in the presence of water and the ability to retain effective filtration even at very fine filtration levels. They readily separate water and retain their colour characteristics for extended periods of operation.

 

Features and Benefits

The Mobil DTE PM Series oils have proven their performance capabilities in modern high-output paper machine lubrication. Their excellent performance properties in the areas of wear protection, enhanced oxidation stability, chemical stability, effective rust and corrosion protection, colour stability, and filterability help to extend maintenance service intervals. This results in less required maintenance, longer equipment life and increased production capacity.

Features Advantages and Potential Benefits
Exceptional Wear Protection Improved bearing and gear performance
Outstanding Oxidation and Thermal Stability Longer oil life

Lower filter replacement costs

Cleaner systems

Reduced system deposits
Effective Water Separation Properties Allows easier removal of water

Reduces formation of emulsions in systems
Good Anti-Fatigue Performance Reduces fatigue failures of bearings and gears
Excellent Filterability Keeps oil lines and flow control mechanisms free of deposits

Improved oil flow and cooling performance

Lowers filter replacement costs
High Level Rust and Corrosion Protection Protects gears and bearings in wet environments

Provides protection against corrosion in a wet and humid environment

 

Applications

  • Lubrication of industrial paper machine circulating systems
  • Application involving circulation systems operating over a wide temperature range
  • Systems that must be started and brought on line quickly
  • Circulation systems' lubricating gears and bearings

 

Typical Properties

Mobil DTE PM Series 100 150 220 320
ISO Viscosity Grade 100 150 220 320
Viscosity, ASTM D 445        
cSt @ 40º C 100 150 220 320
cSt @ 100º C 11.4 14.7 19.0 25.4
Viscosity Index, ASTM D 2270, min 95 95 95 95
FZG 4-Square Load Support, DIN 51354, fail stage 12 12 12 12
Demulsibility, minutes to 3 ml Emulsion at 82º C 10 20 20 20
Rust Characteristics, Proc A and B, ASTM D 665 Pass Pass Pass Pass
Foam Sequence Tendency, ASTM D 892, ml,        
I 0/0 10/0 10/0 10/0
II 40/0 30/0 30/0 30/0
III 0/0 10/0 10/0 10/0
Copper Strip Corrosion, 3 h @ 100º C, ASTM D 130, rating 1A 1A 1A 1A
Pour Point, ºC, ASTM D 97 -6 -6 -6 -6
Flash Point, ºC, ASTM D 92 240 250 260 250
Specific Gravity 15.6º C/15.6º C, ASTM D 1298 0.884 0.888 0.889 0.892

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design and Mobil DTE PM are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.

04-2017

Imperial Oil
Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
C. P. 2480, Station M
Calgary AB T2P 3 M 9


1-800-268-3183


Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.



Loading