Mobil™ Sawguide Oil  

Mobil Industrial, Canada

Premium Sawguide Lubricant

Product Description

MOBIL™ SAWGUIDE OIL is specifically formulated to lubricate and protect guides on modern gang saws and edgers, while helping to reduce lubricant consumption. The choice of viscosity grade depends on equipment type, lubricant delivery system design and ambient temperatures.

MOBIL SAWGUIDE OIL is formulated to cling tenaciously to the guide in the presence of dirt and water to form an effective friction reducing film between the blade and the guide. Reducing the friction reduces the temperature. Lower temperatures require less cooling water; the result - drier sawdust. Friction reduction due to more robust oil film leads to less lateral movement of the blade and more accurate cuts resulting in reduction of kerf and waste.

 

Features and Benefits

Features Advantages and Potential Benefits
Potent EP/Antiwear additive systemBonds with the guide and blade surfaces protecting them from wear, thereby extending component life 
Excellent Rust and Corrosion ControlProtects blades from the effects of water common to the lumber industry
Control of Stray MistReduces stray mist that could be ingested. Can lead to a healthier work environment
Oil Consumption ControlThe tenacity of the lubricant film can protect from water wash off, thereby reducing consumption
Pitch Deposit ControlReduced pitch buildup on saw surfaces can help to reduce cleaning maintenance on the saw

 

Applications

  • Designed to lubricate modern gang saws and edgers
  • Can be applied in other applications where it’s performance features are desirable

Please contact your Imperial Oil representative, or contact the Technical Service Center at 1800 268 3183 for further information on Mobil Sawguide oil, or any of Imperial Oil’s other lubricants.

 

Typical Properties

 Mobil SAWGUIDE OIL 68Mobil SAWGUIDE OIL 100Mobil SAWGUIDE OIL 150
Colour1.01.02.0
Flash Point °C215225225
Density @ 15°C, kg/L0.8770.8780.882
Kinematic Viscosity
- cSt @ 40°C
- cSt @ 100°C
 
68
9.6
 
91
11.5
 
150
16.2
Pour Point, °C-30-24-15
Water Separation Test, ml
@ 54 °C
@ 82°C
 
38
 
 
 
38
 
 
38
Rust PreventionPASSPASSPASS
Falex Pin and V Block8.59.07.2
(ASTM D 2670) Mass Loss, mg. Tooth count121

These values represent normal production quality. Some are controlled by manufacturing specifications while others are not. All may vary within modest ranges.

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

Note: The products described on this data sheet are NOT controlled under Canadian WHMIS legislation.

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

04-2016

Imperial Oil

Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
C. P. 2480, Station M
Calgary AB T2P 3 M 9

1-800-268-3183

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.

Loading