Mobilgrease MB 2  

Mobil Grease, Italy

Automotive Grease

Product Description

Mobilgrease MB 2 is a lithium thickened grease for multi purpose applications in commercial and passenger vehicle cars. It is based on mineral oil with a viscosity close to 180 cSt. The product has excellent oxidation stability and very good water resistance. It also offers excellent corrosion protection and good flow properties even at low temperatures.
 

Mobilgrease MB 2 conforms to Mercedes Benz page 267.

Mobilgrease MB 2 is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.

 

Features and Benefits

FeaturesAdvantages and Potential Benefits
Can be used in a wide variety of automotive applicationsPotential to rationalise products
Long service lifeReduced operating costs from lower maintenance costs and economic usage
Good oxidation and thermal stabilityGood equipment reliability and availability
Excellent protection against rust and corrosion and resistance to water washoutEnhanced equipment protection and good lubrication even in presence of water
Good pumpability in centralised systems at low temperaturesOptimum reliability
Good mechanical stability even at high shear rateLonger service intervals

 

Applications

Mobilgrease MB 2 can be used for many automotive applications. It can be used as a single multi purpose grease in fleets, agricultural and construction equipment where MB page 267 specification has been recommended. Mobilgrease MB 2 can also be used in some industrial applications where a non EP grease is suitable. The product has a speed bearing factor of approximately 200,000DmN. 

 

Specifications and Approvals

Mobilgrease MB 2 meets or exceeds the following industry specifications: 
DIN 51825: (2004-06)KP2K-30

 

Mobilgrease MB 2 has the following builder approvals: 
MB-Approval 267.0X
MAN 283 Li-P 2X

 

Typical Properties

Mobilgrease MB 2 
NLGI Grade2
Base Oil Viscosity @ 40°C, cSt, ASTM D 445180
Thickener TypeLithium
ColourBrown
Penetration, Worked×60, 25 ºC, 0.1mm, ASTM D 217 
Dropping Point, °C, ASTM D 2265›190
4-Ball Weld Load, N, DIN 51350-42600
Static oil release (168hrs @ 40°C), % mass, DIN 518176.5
Rust protection, Emcor test, rating, ISO 110070
Flow pressure test @ -30°C, hPa, DIN 51805‹1400

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Mobilgrease are trademarks of ExxonMobil Corporation, or one of its subsidiaries.

06-2018


Esso Italiana s.r.l.
Via Castello della Magliana  25
00148, Roma, Italia

800.011723

http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.

Loading