MOBIL DELVAC MODERN 15W40 FULL PROTECTION MINE

Mobil commercial-vehicle-lube , Chile

High Performance Diesel Engine Oil

Product Description

Mobil Delvac  Modern 15W-40 Full Protection  Mine  is a  diesel engine oil  formulated to  offer  ring liner wear  protection, viscosity control  and bearing corrosion protection  for the higher demands of  high horsepower off-highway engines.

 

Features and Benefits

Mobil Delvac  Modern 15W-40 Full Protection Mine  is formulated with optimized base oil technology,  to deliver extended performance oil drain intervals1. This proprietary formulation delivers wear protection, outstanding oxidation stability, and exceptional TBN retention.

 

Mobil Delvac Modern 15W-40 Full Protection Mine also provides outstanding resistance to oil oxidation, corrosive and abrasive wear, and high temperature deposits.

 

1 Results vary based on vehicle/engine condition, driving and environmental conditions. Consult OEM or ExxonMobil before implementing extended ODIs, especially if the equipment/vehicle is under warranty.

 

Features

Advantages and Potential Benefits

Outstanding oxidation stability

Extended ODI potential ¹.

Resistance to corrosive and abrasive wear

Long life of critical wear surfaces.

Excellent soot and viscosity control

Greater engine efficiency, long engine life and long oil life.

Excellent oil consumption control

Lower oil costs due to less make-up oil during operation

Outstanding TBN reserves

Corrosion protection and extended drain intervals for both new and old engines

Low temperature fluidity and pumpability

Formulated for smooth starting in cold weather

Component compatibility

Long gasket and seal life

Low ash formulation meeting API CK-4 and CJ-4 requirements

Long emissions aftertreatment life (DPF, DOC and SCR)

 

Applications

•Designed primarily for heavy duty diesel engines in mining applications.

 

•Recommended for the latest heavy duty diesel engines, including those equipped with aftertreatment systems and EGR.

 

•Recommended for diesel applications using older and naturally aspirated conventional designs.

 

•Off-highway applications including    construction.

 

•Off-highway applications operating in severe low speed/heavy load conditions using up to 500 ppm sulfur fuels.

Specifications and Approvals

This product meets or exceeds the requirements of:

API CI-4

API CI-4 PLUS

API CJ-4

API CK-4

Caterpillar ECF-3

Cummins CES 20081

Cummins CES 20086

 

Properties and Specifications

Property

 

Grade

SAE 15W-40

Ash, Sulfated, mass%, ASTM D874

1

Density @ 15.6 C, g/ml, ASTM D1298

0.8734

Flash Point, Cleveland Open Cup, °C, ASTM D92

227

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

16.2

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

126

Pour Point, °C, ASTM D97

-24

Total Base Number, mgKOH/g, ASTM D2896

9.2

Viscosity Index, ASTM D2270

137

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2021

Compañía de Petróleos de Chile Copec SA

Isidora Goyenechea 2915, Las Condes, Santiago Chile

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.