Mobil Delvac 1™ 5W-40

Mobil commercial-vehicle-lube , 中国

Advanced Full Synthetic Engine Oil

Product Description

Mobil Delvac 1™ 5W-40 is a fully synthetic high performance heavy duty diesel engine oil that helps towards long engine life while providing long drain capability for modern diesel engines operating in severe applications. Mobil Delvac 1™ 5W-40 delivers excellent performance in modern engines, including refrigerated units, as well as older, well-maintained engines. Mobil Delvac 1 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in the on-road transport and off-road mining, construction, and agricultural industries.

 

The excellent performance of Mobil Delvac 1™ 5W-40 is the result of extensive cooperative development work with major equipment builders and application of advanced lubrication technology. As a result, this product meets or exceeds demanding specifications of major OEMs.

 

Features and Benefits

 

Features

Advantages and Potential Benefits

Meets or exceeds demanding specifications of major OEMs

One engine oil for mixed fleet operations

Outstanding thermal and oxidation stability

Control of low temperature sludge build-up and high temperature deposits

Low volatility, excellent wear and bore polish control

Good oil consumption control

Expertly formulated low viscosity formulation

Fuel economy potential1

Exceptional low temperature pumpability

Easier engine start-up and reduced wear

Good resistance to corrosion

Helps towards long life of critical wear surfaces

Long drain capability

Help towards operational efficiency and overall cost control

Component compatibility

Long gasket and seal life, extended service intervals

 

Applications

Many modern, low emission diesel engines generate more soot and operate at higher temperatures than older engines. This significantly increases the need for high performance lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher, bringing the oil film closer to the combustion chamber and exposing the lubricant to severe thermal stresses. Mobil Delvac 1™ 5W-40 maintains outstanding performance at high temperatures. The key benefits include:

 

1 Relative to conventional 15W-40 engine oil. Actual fuel economy improvement is dependent on vehicle/equipment type, outside temperature, driving conditions and your current fluid viscosity.

 

Specifications and Approvals

 

This product has the following approvals:

MACK EO-N

MAN M 3277

MAN M 3377

MB 228.5-V2021.1

MTU Oil Category 3

RENAULT TRUCKS RLD-2

VOLVO VDS-3

 

This product is recommended for use in applications requiring:

API CF-4

API CG-4

 

This product meets or exceeds the requirements of:

API CH-4

API CI-4

API CI-4 PLUS

JASO DH-1

ACEA E4-16

ACEA E7-16

Caterpillar ECF-2

CUMMINS CES 20076

CUMMINS CES 20077

CUMMINS CES 20078

ISUZU DEO (w/o DPD Equipped Vehicles)

 

Properties and Specifications

Property

 

Grade

SAE 5W-40

Flash Point, Cleveland Open Cup, °C, ASTM D92

220

Density @ 15 C, g/ml, ASTM D1298

0.85

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

15.4

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

92.7

Total Base Number, mgKOH/g, ASTM D2896

14.5

Viscosity Index, ASTM D2270

174

Cold-Cranking Simulator, Apparent Viscosity @ -30 C, mPa.s, ASTM D5293

6040

Pour Point, °C, ASTM D97

-48

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise. ​

04-2023

ExxonMobil (China) Investment Co. Ltd
17th Floor, Metro Tower
30 Tian Yao Qiao Road
Shanghai 2000030
China

+86 21 24076000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.