Mobil DTE Oil 205
Mobil industrial , New Zealand
Mobil DTE Oil 205 is a lubricating oil formulated to provide excellent anti-wear and friction-reducing properties for compressor cylinder lubrication as well as protection against rust and corrosion. Mobil DTE Oil 205 is designed for wet-gas compression and exhibits excellent resistance to washing by water and other entrained liquids. It resists oxidation and provides effective lubrication at low feed rates, thereby extending operating periods between valve-cleaning intervals.
Features and Benefits
Mobil DTE Oil 205 offers the following benefits:
|Features||Advantages and Potential Benefits|
|Excellent resistance to washing by water and other entrained liquids||Extended cylinder, ring, and packing life|
|Effective lubrication at low feed rates||Reduced oil purchases, extended valve rebuild intervals|
|Good anti-wear and friction reducing||Extended ring and packing life properties|
|Rust and corrosion protection||Extended compressor cylinder life|
|Resists oxidation||Reduced discharge valve deposits, extended valve rebuild intervals|
Mobil DTE Oil 205 lubricant is recommended for the cylinder lubrication of reciprocating compressors and special rotary sliding vane compressors in air and inert gas service. It is particularly applicable where wet gas is being compressed. While developed primarily for multistage compressors, its superior qualities will provide benefits in many single- and two-stage compressors operating at higher pressures or discharge temperatures or when compressing wet gas.
Mobil DTE Oil 205 is not designed for use in compressor crankcases, particularly those compressors having high lead bearings, or crankshafts fitted with lead counterweights.
It should not be used when compressing air for breathing.
|Mobil DTE Oil 205|
|Specific Gravity, calc.||0.90|
|Pour Point, °C (°F)||-9 (16)|
|Flash Point, °C (°F), min||282(540)|
|Viscosity, ASTM D 445|
|cSt at 40°C||220|
|cSt at 100°C||19.5|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet at http://www.msds.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and DTE are trademarks of ExxonMobil Corporation, or one of its subsidiaries.11-2019