Mobil 1™ Formula 0W-40

Mobil passenger-vehicle-lube , Thailand

Advanced Full Synthetic Motor Oil

Product Description

Mobil 1™ Formula 0W-40 Advanced Full Synthetic Motor Oil is engineered for the latest gasoline and diesel (without Diesel Particulate Filters or DPFs) engine technology delivering excellent all-round performance. It provides exceptional cleaning power, wear protection and overall performance.

 

Features and Benefits

Mobil 1 Formula 0W-40 is engineered with a proprietary blend of ultra-high performance synthetic basestocks fortified with a precisely balanced component additive system.

 

Features

Advantages and Potential Benefits

Broad application

Meets or exceeds many OEM and industry approvals

Advanced full synthetic formulation

Excellent overall lubrication and wear protection

Excellent low temperature capabilities

Rapid engine protection at start-up to reduce engine wear.

Active cleaning agents

Help keep your engine run clean

Outstanding high temperature thermal and oxidative stability

Resists oil breakdown to provide long lasting protection

 

Applications

Mobil 1 Formula 0W-40 is recommended for many types of modern vehicles where it will help provide unsurpassed performance under very demanding driving conditions, including:

 

• Latest engine technologies including Turbo-chargers, Direct Injection, Diesels and Hybrids

 

• High Performance Engines

 

• Helps to extend Oil Drain

 

• Nearly all operating conditions, from mild to extreme

 

Most operating conditions, from mild to extreme

 

 

 

 Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.

 

Specifications and Approvals

This product has the following approvals:

MB-Approval 229.3

MB-Approval 229.5

 

This product is recommended for use in applications requiring:

API CF

 

This product meets or exceeds the requirements of:

API SJ

API SL

API SM

API SN

ACEA A3/B3

ACEA A3/B4

Fiat 9.55535-M2

 

Properties and Specifications

Property

 

Grade

SAE 0W-40

Flash Point, Cleveland Open Cup, °C, ASTM D92

230

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.8

Ash, Sulfated, mass%, ASTM D874

1.3

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

75

Density @ 15 C, g/cm3, ASTM D4052

0.849

Total Base Number, mgKOH/g, ASTM D2896

11.8

Pour Point, °C, ASTM D97

-48

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13.5

Viscosity Index, ASTM D2270

185

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

06-2020

Esso (Thailand) Public Company Limited
3195/17-29 Rama IV Road
Klong Tan, Klong Toey District
Bangkok 10110
Thailand

+66 2 2624 000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.