Mobil SHC™ 600 Series

Reduce your energy consumption by up to 3.6 percent with Mobil SHC™ 600 Series synthetic circulating and gear oils.

For more than 40 years, Mobil SHC™ 600 Series synthetic circulating and gear oils have delivered premium performance and maximized production uptime in industrial gearboxes operating in extreme temperatures and under heavy loads.

Recommended for use in more than 1,800 applications by more than 500 major equipment builders, Mobil SHC 600 Series synthetic lubricants continue to be recognized by OEMs addressing specific lubrication challenges while maintaining excellent overall performance.

Mobil SHC 600 Series synthetic lubricants can reduce energy consumption in gearboxes and circulating systems by up to 3.6 percent*. They can also:

  • Extend oil life by up to six times vs. conventional oil
  • Offer similar seal and metals compatibility as conventional oils
  • Operate in a wide range of industrial applications

  • Help achieve peak productivity by optimizing equipment uptime

  • 500+ major equipment builders recommend these lubricants in 1,800+ applications

  • Help limit power consumption, which can minimize your cost of operation

  • Minimize maintenance through exceptional protection, even in extreme conditions

Download PDS Talk to an expert Send to a colleague

Product series information

Mobil SHC™ 600 Series offers 10 lubricant grades

Narrow your results by using the filters below.
Show more Show less

There were no results for '{{filters.q}}'.

Showing {{results.length}} of {{totalCount}} product grades
{{r.title}}

{{r.col2}}

Technical resources

Mobil SHC™ 639 helps cement mill with gear and bearing oil success story

Switching to Mobil SHC™ 639 helped one cement mill reduce operating temperatures and increase productivity.

English, pdf

Mobil SHC™ 630 helps Honam Petrochemical Corporation with gear oil success story

Looking for reliability? So was this customer, who switched to Mobil SHC™ 630 synthetic gear oil and started saving $60,000 annually in the process.

English, pdf

Mobil SHC™ 626 helps Xinyu Iron & Steel Co., Ltd. Heat Electric Plant with gearbox efficiency success story

Switching to Mobil SHC™ 626 helped one customer lower the operating temperature in their tower fan gearboxes to realize big savings.

English, pdf

Mobil SHC™ 630 helps Xinyu Iron & Steel Co., Ltd. Coking Branch with gearbox operating temperatures success story

See how one customer reduced safety risks while improving energy efficiency by implementing Mobil SHC™ 630 synthetic gearbox oil.

English, pdf

All Mobil SHC™ 600 Series resources

Features and Benefits

The Mobil SHC brand of lubricants are recognized and appreciated around the world for their innovation and outstanding performance. These synthetic products, molecularly designed and pioneered by our research scientists, embody the continuing commitment to using advanced technology to provide outstanding lubricant products. The development of Mobil SHC 600 Series was preceded by close contacts between our scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.

Our work with key equipment builders has helped confirm the results from our own laboratory and rig tests showing the exceptional performance of Mobil SHC 600 Series lubricants. Not least among the benefits, shown in work with OEMs, is the potential for energy efficiency improvements up to 3.6% relative to mineral oils (*). These benefits are particularly evident in equipment with a high level of mechanical losses, such as high ratio worm gears.

To develop the latest Mobil SHC technology for Mobil SHC 600 Series oils, our product formulation scientists chose select base oils because of their exceptional thermal/oxidative resistance potential and combined them with a balanced additive system, which complements the inherent benefits of the base oils to provide excellent oil life, deposit control and resistance to thermal/oxidative and chemical degradation. This formulation approach provides low temperature fluidity characteristics exceeding that of many conventional mineral products and is a key benefit for remote, low ambient temperature applications. Mobil SHC 600 Series oils offer the following features and potential benefits:

Features Advantages and Potential Benefits
Superb high temperature thermal/oxidation resistance Helps extend equipment high temperature operating capability
Long oil life, helps reduce maintenance costs
Helps minimize deposits to enable trouble-free operation and long filter life
High Viscosity Index and absence of wax Maintains viscosity and film thickness at high temperatures
Helps enable exceptional low temperature performance, including start-up
Low traction coefficient Helps reduce friction and increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption and lower steady-state operating temperatures.
Helps minimize the effects of micro slip in rolling contact bearings to potentially extend rolling-element life
High load carrying capability Helps protects equipment and extends life; helps minimize unexpected downtime and extends service periods
Balanced additive combination Provides excellent performance in terms of rust and corrosion prevention, water separability, foam control and air release performance enabling problem-free operation in a wide range of industrial applications, and reduced operating costs

(*) Energy efficiency relates solely to the performance of Mobil SHC 600 when compared to conventional (mineral) reference oils of the same viscosity grade in circulating and gear applications. The technology used allows up to 3.6% efficiency compared to the reference when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and application. 

 

Applications

While Mobil SHC 600 Series are generally compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC 600 Series oils are compatible with most NBR, FKM and most other elastomeric seal materials that are used with mineral oils. There is the potential for substantial variations in the elastomers. For best results, consult your equipment supplier, seal manufacturer, or your local company representative to verify compatibility.

Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning and lubricant changes are high. Specific applications require selection of the appropriate viscosity grade and include:

  • Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
  • Remotely located gearboxes, where oil change-out is difficult
  • Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
  • Mixer roll bearings and roll neck bearings where high temperatures are encountered
  • Plastic calenders
  • Severe centrifuge applications, including marine centrifuges
  • Railroad A/C Traction Drives
  • Mobil SHC 626, 627, 629 and 630 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
  • Mobil SHC 629, 630, 632, 634, 636, and 639 are approved by Siemens AG for use in Flender gearboxes

 

Specifications and Approvals

Mobil SHC 600 Series meets or exceeds the requirements of: 624 625 626 627 629 630 632 634 636 639
AGMA 9005 E02 X X
DIN 51517-3 CLP      
ISO 12925-1 CKB                  
ISO 12925-1 CKD   X  X

 

Mobil SHC 600 Series has the following builder approvals: 624 625 626 627 629 630 632 634 636 639
Fives Cincinnati     P-63
P-80
P-76 P-77       P-34 P-78
SIEMENS AG Flender gear units, T 7300, Table A-c, Flender Code No.         A36 A35 A34 A33 A32 A31
SEW Eurodrive:
SEW IG CLP HC
SEW SG CLP HC

32
32
 
68
68
 
150
150

220
220

320

460
460

680

1000

 

Typical Properties

Mobil SHC 600 Series 624 625 626 627 629 630 632 634 636 639
ISO Viscosity Grade 32 46 68 100 150 220 320 460 680 1000
Viscosity, ASTM D 445                    
cSt @ 40ºC 32 46 68 100 150 220 320 460 680 1000
cSt @ 100ºC 6.3 8.5 11.6 15.3 21.1 28.5 38.5 50.7 69.0 98.8
Viscosity Index, ASTM D2272 148 161 165 162 166 169 172 174 181 184
Pour Point, ºC, ASTM D5950 -57 -54 -51 -45 -39 -36 -33 -30 -30 -27
Flash Point, ºC, ASTM D 92 236 225 225 235 220 220 225 228 225 222
Density @ 15°C (60°F) (g/cc)
ASTM D4052
0.85 0.85 0.86 0.86 0.86 0.87 0.87 0.87 0.87 0.87
Appearance, visual Orange Orange Orange Orange Orange Orange Orange Orange Orange Orange
TOST, ASTM D 943 mod, hours 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+ 10,000+
RPVOT, ASTM D 2272, minutes 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
Rust protection, ASTM D665B, Synthetic Sea Water Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass
Water Separability, ASTM
D1401,Min. to 37 ml water @ 54ºC
10 15 15 - - - - - - -
Water Separability, ASTM
D1401,Min. to 37 ml water @ 82ºC
- - - 15 20 20 20 20 20 25
Copper Corrosion, ASTM D130,
24 hrs @ 121ºC
1B 1B 1B 1B 1B 1B 1B 1B 1B 1B
Foam Test, ASTM D892, Seq I,II,IIITendency / Stability, ml/ml 15/0, 20/0,
25/0
10/0,
30/0,
10/0
10/0, 20/0,
10/0
0/0,
10/0,
0/0
0/0, 0/0,0/0 0/0,
10/0,
0/0
0/0,0/0,0/0 0/0,0/0,0/0 0/0,0/0,0/0 0/0, 0/0, 0/0
FZG gear scuffing test, A/8.3/90,
ISO 14635-1 (mod),
Failure Stage
11 12 12 12 13 13+ 13+ 13+ 13+ 13+
FAG FE8 Bearing Wear Test
7.5/80-80
((DIN 51819-3)
Roller Wear (mg)
 - - - 2 2

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

All products may not be available locally.

Note for Canadian users: Mobil SHC 600 Series is not controlled under Canadian WHMIS legislation.

*The energy efficiency design is a trademark of Exxon Mobil Corporation. Energy efficiency relates solely to the fluid performance when compared to conventional (mineral) reference oils of the same viscosity grade in circulating and gear applications. The technology used allows up to 3.6 percent efficiency compared with the reference when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and applications.
  • Mobil Serv℠ technical services

    Explore technical services from our Mobil Serv℠ Lubricant Analysis program to plant studies that can help your organization improve performance and productivity.

    Learn more
  • Our purpose - Advancing Productivity

    Advancing Productivity is our commitment to business sustainability solutions built from high-performance products, lubrication services and industry expertise to help deliver operational safety, reduce environmental impact and improve productivity.

    Learn more
Loading...