Product Description
Mobil Delvac 1630, 1640, and 1650 are high performance monograde diesel engine
oils formulated from advanced technology base oils and a balanced additive
system. They are specifically engineered for performance in intercooled,
turbo-charged engines operating under severe on and off-highway conditions.
Mobil Delvac 1600 monogrades are used in a wide range of applications where a
monograde lubricant is recommended.
Features and Benefits
Features
|
Advantages and Potential Benefits
|
|
Excellent protection against oil thickening, high temperature deposits, sludge
build-up, oil degradation and corrosion
|
Prolonged engine life Less wear Excellent protection against
ring sticking
|
|
Extended TBN reserve
|
Long-term deposit/wear control Controls formation of acids when using
higher sulfur fuels
|
Applications
- Naturally aspirated and turbo-charged diesel powered equipment
- On-highway light and heavy-duty trucking
- Off-highway industries including: construction, mining, quarrying, and agriculture
Back to Top
Specifications and Approvals

Mobil Delvac 1600 Monogrades meet or exceed the following industry and builder
specifications:
| 
Mobil Delvac 1630
| 
Mobil Delvac 1640
| 
Mobil Delvac 1650
|
| API CF | X | X | X |

Mobil Delvac 1600 Monogrades have the following builder approvals:
| 
Mobil Delvac 1630
| 
Mobil Delvac 1640
| 
Mobil Delvac 1650
|
| MTU Type 2 | X | X | |
| Mercedes Benz 228.2 | X | X | |

Mobil Delvac 1600 Monogrades are recommended for use in applications requiring:
| 
Mobil Delvac 1630
| 
Mobil Delvac 1640
| 
Mobil Delvac 1650
|
| API SF | X | X | X |
| Allison C-4 | X | | |
| MAN 270 | X | X | |
Other Qualifications
Typical Properties

Mobil Delvac 1600 Monogrades
| 
Mobil Delvac 1630
| 
Mobil Delvac 1640
| 
Mobil Delvac 1650
|
| SAE Grade | 30 | 40 | 50 |
| Viscosity, ASTM D 445 | | | |
| cSt @ 40ºC | 90 | 132 | 202 |
| cSt @ 100ºC | 11.5 | 14.7 | 19.5 |
| Viscosity Index, ASTM D 2270 | 117 | 112 | 110 |
| Sulfated Ash, wt%, ASTM D 874 | 1.4 | 1.4 | 1.4 |
| Total Base #, mg KOH/g, ASTM D 2896 | 12 | 12 | 12 |
| Pour Point, ºC, ASTM D 97 | -30 | -21 | -18 |
| Flash Point, ºC, ASTM D 92 | 230 | 239 | 290 |
| Density @ 15ºC kg/l, ASTM D 4052 | 0.889 | 0.892 | 0.896 |
Back to Top
Health and Safety
Based on available information, this product is not expected to produce
adverse effects on health when used for the intended application and the
recommendations provided in the Material Safety Data Sheet (MSDS) are
followed. MSDS's are available upon request through your sales contract
office, or via the Internet. This product should not be used for purposes
other than its intended use. If disposing of used product, take care to
protect the environment.
The Mobil logotype, the Pegasus design, and Delvac are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
|