Mobilgrease CM Series
Mobilgrease CM Series products are a family of extra high performance extreme-pressure greases. Mobilgrease CM-P and CM-S are NLGI Grade 2, while Mobilgrease CM-W and CM-L are NLGI Grade 1. All four products are manufactured with a proprietary high-temperature, lithium complex thickener system. They exhibit excellent resistance to softening under severe working, and provide good adhesion and cohesion. An extreme-pressure additive provides exceptional protection against wear, while additional additives enhance resistance to high-temperature oxidation and protection against rust. In addition, Mobilgrease CM-P and Mobilgrease CM-L contain 3% molybdenum sulphide for additional wear protection. Other formulation features provide low-temperature dispensing, very good resistance to water wash, and long service in bearings operating at high temperatures. These heavy-duty, severe-service greases have outstanding structural and chemical stability. Mobilgrease CM Series products won't corrode steel or copper-bearing alloys and are compatible with conventional seal materials.
Mobilgrease CM greases are recommended by ExxonMobil for use in for construction and mining sector applications. Mobilgrease CM-P is recommended by ExxonMobil for use in for highly loaded plain and antifriction bearings and other applications where the three percent molybdenum disulphide and high-temperature thickener system will provide extraordinary performance. Mobilgrease CM-S is recommended by ExxonMobil for use in plain and antifriction bearings in contractor and mining vehicles working under severe operating and weather conditions. The recommended application temperature range for Mobilgrease CM-P and CM-S is -20º C to +145º C Mobilgrease CM-L and CM-W are winter-grade products and are recommended for cold-temperature service. The recommended application temperature range for Mobilgrease CM-L and CM-W is -30º C to +145º C
Mobilgrease CM Series greases are leading members of the Mobilgrease brand of products, which has gained a world-wide reputation for innovation and performance excellence. Mobilgrease CM Series grease products are designed by our formulation technologists and backed by our world-wide technical support staff.
Mobilgrease CM Series greases are designed specifically to meet the needs of customers with heavily loaded equipment that require high EP/antiwear performance which remain in place even in tough conditions of water wash, high sliding and high temperature. These greases are targeted especially for the severe construction and mining sector and offer the following features and potential benefits:
|Features||Advantages and Potential Benefits|
|Excellent resistance to water, including spray||Maintains excellent lubrication properties and protects equipment in conditions of water contamination|
|Very good EP and anti-wear protection||Lower maintenance costs and less unanticipated downtime|
|Better stay-put properties at high temperatures||Excellent performance in high shear, high load applications, especially where grease re-supply is limited|
|Resists rust and corrosion||Protects equipment in presence of water for reduced maintenance and longer equipment life|
|Good pumpability at low temperatures||Excellent low temperature properties including start-up in remote locations|
Recommended by ExxonMobil for use in:
Heavily loaded applications or environments highly contaminated with water, especially in the contractor / mining sector. Specific examples of such applications include:
|Mobilgrease CM Series meets or exceeds the requirements of the following industry specification:||CM-L||CM-P||CM-W||CM-S|
|DIN 51825: (2004-06)||KPF2N-20|
|Penetration, Worked, 25º C, ASTM D 217, mm/10||325||280||325||280|
|Dropping Point, ºC, ASTM D 2265||260||260||260||260|
|Viscosity of Oil, ASTM D 445|
|KV @ 40º C||150||320||150||320|
|Penetration Consistency Change, ASTM D 1831, mm/10||-15||-3||-15||-4|
|4-Ball EP, Weld Load, ASTM D 2596, kg||250||250||250||250|
|4-Ball Wear Test, ASTM D 2266, Scar, mm||0.5||0.5||0.5||0.5|
|Corrosion Prevention, ASTM D 1743, Rating||Pass||Pass||Pass||Pass|
|Copper Strip Corrosion, ASTM D 4048||1A||1A||1A||1A|
|Water Washout, ASTM D 1264 1 hr. @ 79º C, %||12||6||12||6|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved..