Mobil Velocite Oil Numbered Series
Spindle and Hydraulic Oils
The Mobil Velocite Oil Numbered Series oils are premium performance products primarily designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and air line oilers where the appropriate viscosity grade is selected. They are formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water.
The Mobil Velocite Oil Numbered Series provide exceptional lubrication of close-tolerance bearings which helps keep the bearings running cool and helps maintain the precision required by many of today's critical machine tools. Although the Mobil Velocite Oil Numbered Series oils were designed for spindle bearings, they exhibit the required properties to function as low pressure hydraulic and circulating oils as long as the proper viscosity is selected. This feature can help minimise inventory costs and reduce the potential for product misapplication.
|Features||Advantages and Potential Benefits|
|Good Oxidation Resistance||Helps reduce critical deposit formation
Improves oil life
|Very Good Rust and Corrosion Protection||Improves equipment life
Provides increased precision long-term
|Effective Water Separation||Resists emulsion formation
Keeps moisture out of critical lubrication areas
Allows easy removal of moisture from system reservoirs
|Mobil Velocite Oil Numbered Series||No 3||No 4||No 6||No 8||No 10|
|Viscosity, ASTM D 445|
|cSt @ 40ºC||2.1||4.83||10.0||15.0||22.0|
|cSt @ 100ºC||0.95||1.53||2.62||3.28||4.0|
|Total Acid Number, ASTM D 974, mgKOH/g||0.06||0.06||0.06||0.06||0.1|
|Copper Strip Corrosion, 3 hrs @ 100º C, ASTM D 130||1A||1A||1A||1A||1A|
|Rust Characteristics, Proc A, ASTM D 665||Pass||Pass||Pass||Pass||Pass|
|Pour Point, ºC, ASTM D 97||-36||-15||-15||-9||-30|
|Flash Point, ºC, ASTM D 92||84||102||180||194||212|
|Density @ 15º C, ASTM D 4052, kg/L||0.802||0.822||0.844||0.854||0.862|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and Velocite are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved..