Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded,
diluent-type, heavy-bodied open gear lubricants designed for a wide variety of
open gear and mining applications. They contain a non-chlorinated, volatile
solvent that ensures fluidity during application, even at low temperatures.
Once applied, the diluent evaporates and the lubricants take on a flexible,
adhesive, high-strength consistency that is maintained throughout their
service life. Mobiltac 375 NC, 325 NC and 275NC adhere strongly to gear teeth
and other machine elements to resist excessive throw-off, thereby providing a
wear-resistant, viscous, continuous film that lubricates well under boundary
conditions. Mobiltac 275 NC also contains solid phase EP/anti-wear additive
for added equipment protection
Mobiltac 375 NC, 325 NC and Mobiltac 275NC will not harden, chip, or flake in cold weather, are self-healing, and do not form a hard-packed buildup in gear-tooth roots. Dripping and throw-off are minimal, and the lubricants are easily cleaned up with a solvent-soaked rag. The lubricants provide resistance to rain, snow, and process water washing. Their flash points minimise the risk of fire. These new generation gear and mining lubricants are applied easily by hand or by automatic dispensers. Mobiltac NC technology has rapidly become a firm favourite among many open gear users and mine operators around the world
The Mobiltac NC Series of products are the most recent technology advance for the Mobiltac brand of products that have been used with great success in open gear and other mining applications for several decades. These new technology products provide significantly improved environmental and performance benefits over older diluent-type technologies. They offer the following features and potential benefits:
|Features||Advantages and Potential Benefits|
|Excellent protection of gear teeth and other machine elements under boundary lubrication conditions||Less equipment wear and breakdown; lower replacement, downtime and maintenance costs|
|Excellent low-temperature pumpability||Easy start-up at low ambient and avoids cost of preheating|
|Excellent resistance to water washing||Maintains superb protection in wet environments; less unanticipated downtime|
|Minimal throw-off and dripping||Less product waste and new product cost|
|No chipping or flaking at low temperatures||Maintains protective lubricating film at low temperatures|
|Easy to clean up with rags and conventional solvents or cleaning fluids||Improved safety and reduced maintenance costs|
Mobiltac 375 NC, 325 NC and Mobiltac 275NC are designed for use in a wide variety of open gear and mining applications:
|Mobiltac NC||Mobiltac375 NC||Mobiltac325 NC||Mobiltac275 NC|
|Appearance||Viscous, semi-fluid, black||Viscous, semi-fluid, black||Viscous, semi-fluid, black|
|Viscosity, ASTM D 445|
|cSt @ 40º C, with diluent||5000||1500||-|
|cSt @ 100º C, without diluent||1260||1000||-|
|Flash Point, ºC, ASTM D 92||135||110||150|
|Specific Gravity, ºC kg/l, ASTM D 1298||0.96||0.95||0.99|
|Maximum Temperature Use, ºC||121||93||-|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.