Product Description
Mobil 1 ESP Formula M 5W-40 is an advanced performance synthetic engine oil
designed to provide exceptional cleaning power, wear protection and overall
performance. Mobil 1 ESP Formula M 5W-40 is engineered to help prolong the
life and maintain the efficiency of Car Emission Reduction Systems in both
diesel and gasoline powered automobiles that require an oil that is approved
against Daimler Chrysler's MB 229.51 specification.
Features and Benefits
Mobil 1 ESP Formula M 5W-40 is made with a proprietary blend of high
performance components formulated to be fully compatible with the latest
Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters (CAT's).
Mobil 1 ESP Formula M 5W-40 has been designed to deliver outstanding overall
performance and protection. Key features and benefits include:
Features
|
Advantages and Potential Benefits
|
|
Low Ash Content
|
Helps to reduce particulate build up in Diesel Particulate Filters
|
|
Low Sulphur and Phosphorous content
|
Helps to reduce poisoning of Gasoline Catalytic Converters
|
|
Active cleaning agents
|
Reduces deposits and sludge build-up to enable long and clean engine life
|
|
Outstanding thermal and oxidation stability
|
Reduces oil ageing allowing extended drain interval protection
|
|
Low oil consumption
|
Less hydrocarbon pollution
|
|
Excellent low temperature capabilities
|
Quick cold weather starting and ultra fast protection. Also helps extend
engine and electrical system life.
|
Applications
Mobil 1 ESP Formula M 5W-40 is approved against Daimler Chrysler MB 229.51.
- It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Back to Top
Specifications and Approvals
Mobil 1 ESP Formula M 5W-40 has the following builder approvals:
|
|
| Daimler Chrysler | MB 229.51 |
Typical Properties
Mobil 1 ESP Formula M 5W-40
|
|
| SAE Grade | 5W-40 |
| Viscosity, ASTM D 445 | |
| cSt @ 40ºC | 81.1 |
| cSt @ 100ºC | 13.35 |
| Viscosity Index, ASTM D 2270 | 167 |
| Sulphated Ash, wt%, ASTM D 874 | 0.63 |
| HTHS Viscosity, mPa•s @ 150ºC, ASTM D4683 | 3,8 |
| Pour Point, ºC, ASTM D 97 | -39 |
| Flash Point, ºC, ASTM D 92 | 236 |
| Density @ 15ºC, kg/l, ASTM D 4052 | 0.85 |
Back to Top
Health and Safety
Based on available information, this product is not expected to produce
adverse effects on health when used for the applications referred to above and
the recommendations provided in the Material Safety Data Sheet (MSDS) are
followed. MSDS's are available upon request through your sales contact office,
or via the Internet. This product should not be used for purposes other than
the applications referred to above. If disposing of used product, take care to
protect the environment.
The Mobil logotype, the Pegasus design and "Mobil 1" are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
|
