Mobil Clean High Mileage is formulated from high quality base stocks combined with the modern performance additives, including a seal conditioner to help prevent leaks in higher mileage vehicles and an advanced cleaning additive system to provide excellent engine cleanliness at oil drain intervals up to 5,000 miles or 6 months, whichever comes first.

These oils protect against sludge and engine rust and corrosion under severe and low-temperature operating conditions. Pour depressants and a viscosity index (VI) improver are included, where required, to provide optimized viscosity and fluidity over a wide range of ambient temperatures.

Mobil Clean High Mileage is available in three multi-viscosity grades: SAE 5W-30, 10W-30 and 10W-40.

Mobil Clean High Mileage 5W-30 and 10W-30 contain friction-reducing additives, and these two viscosity grades are classified by the American Petroleum Institute (API) as "Energy Conserving" engine lubricants, and meet ILSAC GF-4. All three viscosity grades meet API SM.

• Contains a seal conditioner to help prevent or control seal leaks in higher mileage vehicles
• Proven protection of critical engine parts from lubrication related failure for 5,000 miles or 6 months, whichever comes first
• 5W-30 and 10W-30 viscosity grades satisfy the latest oil requirements of gasoline engine manufacturers who recommend ILASC GF-4 (Starburst)
• Extra cleaning performance to help prevent the formation of sludge and harmful deposits
• Outstanding wear protection under a wide variety of operating conditions
• Meet latest industry fuel efficiency requirements (Mobil Clean High Mileage 5W-30 and 10W-30)
• Easier cold starting than monograde oils such as SAE 30 and SAE 40

Mobil Clean High Mileage 5W-30 and Mobil Clean High Mileage 10W-30 are recommended for higher mileage (generally more than 75,000 miles) gasoline fueled automobiles and light duty trucks requiring an API SM, SL or SJ product or API CF or CD. They also meet ILSAC GF-4 (Starburst Certification Symbol).

Mobil Clean High Mileage 10W-40 is recommended for higher mileage gasoline fueled automobiles and light duty trucks where a higher viscosity oil is preferred or recommended and where an API SM, SL or SJ or API CF or CD product is required. A SAE 10W-40 oil may provide better oil consumption control in older vehicles where oil usage (burning) is an issue.

Before using a Mobil Clean High Mileage performance motor oil, consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and API Service Classification.

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.