PrintFind a PDSFind a MSDS

Mobilube HD Plus 80W-90, 85W-140

Extra High Performance Commercial Gear Lubricants

Product Description

Mobilube HD Plus 80W-90 and 85W-140 are extra high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for performance in heavy-duty commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected. They provide excellent chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and have demonstrated good rust protection resulting from water contamination and wet conditions. They are recommended by ExxonMobil for applications where API GL-5 and MT-1 service is required. Mobilube HD Plus 80W-90 and 85W-140 share common formulations with Esso Gear Oil GX 80W-90 and 85W-140.

 

Features and Benefits

Today's heavy equipment applications place higher performance demands on drive train lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant. Mobilube HD Plus gear lubricants are engineered to meet these challenges. The key benefits include:

FeaturesAdvantages and Potential Benefits
Excellent thermal stability and resistance to high temperature oxidationExtended gear and bearing life due to minimal deposits and longer seal life
Good protection against low speed/high torque wear and against high speed scoringIncreased load carrying capability and reduced operating costs
Excellent rust, staining, and corrosion protectionReduced wear and longer component life
Effective low temperature lubricationReduced wear and ease of start-up
Wide multipurpose capabilityReduced number of gear lubricants to simplify inventory and minimize misapplication
Good resistance to foamingMaintains film strength for effective lubrication
Compatible with typical automotive seals and gasketsMinimum leakage and reduced contamination

 

Applications

      Recommended by ExxonMobil for use in:

 

Specifications and Approvals

Mobilube HD Plus Gear Oil meets or exceeds the requirements of the following industry specifications:80W-9085W-140
API GL-5XX
API MT-1XX
SAE J2360XX
SCANIA STO-1:0XX

 

Mobilube HD Plus Gear Oil has the following builder approvals:80W-9085W-140
Mack GO-JXX

 

Mobilube HD Plus Gear Oil is of the following quality level, but not approved:80W-9085W-140
MIL-PRF-2105EXX

 

Typical Properties

Mobilube HD Plus  
SAE Grade80W-9085W-140
Viscosity, ASTM D 445  
cSt @ 40ºC139333
cSt @ 100ºC14.525.4
Viscosity Index, ASTM D 227010399
Pour Point, ºC, ASTM D 97-27-18
Flash Point, ºC, ASTM D 92210230
Density @ 15ºC kg/l, ASTM D 40520.8950.903

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design, and Mobilube HD Plus are trademarks of Exxon Mobil Corporation, or one of its subsidiaries. 

2-2011 

Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.