Mobil 1™ Motorcycle Oils are advanced performance synthetic motorcycle oils. The unique, synthetic structure of the Mobil 1 Motorcycle formulations enables them to offer advantages beyond conventional motorcycle oils of similar viscosities. For example, base oils become lighter in viscosity as temperature increase. This characteristic forces manufacturers of oils to use thickeners which will help the oil maintain its viscosity as the temperature increase. These thickeners, however, can shear down and lose their thickening capacity in an operating engine or transmission. Synthetic fluids do not require as much thickener to achieve a multigrade viscosity rating and, in some cases, do not require any thickener. As a result, synthetic formulations tend to be very shear stable and thus, provide a solid, protective oil film for engine bearings, piston rings, transmission gears and other critical engine parts.
Both Mobil 1 Motorcycle formulations offer excellent flow characteristics at low temperatures to help reduce engine wear at start-up, and provide outstanding resistance to oxidation and/or volatilization at high temperatures, both of which degrade the oil. Further, the Mobil 1 Motorcycle Oils help provide outstanding protection against engine wear under high-temperature and high engine speed conditions. Each of the Mobil 1 Motorcycle product formulations have been optimized to help meet the unique performance characteristics demanded by motorcycle engines and thus, provide an extremely high level of performance and protection for motorcycle engines
Mobil 1 Racing 4T 10W-40 and Mobil 1 V-Twin 20W-50 4-cycle motorcycle oils
Mobil 1 Motorcycle Oils are full synthetic, high-performance engine oils formulated specifically to meet the demanding needs of motorcycle engines. Mobil 1 Racing 4T 10W-40 is designed primarily for on-road, high-performance, 4-cycle sport bikes, however, it may be used in other types of on and off-road 4-cycle motorcycles especially where a 10W-40 viscosity grade is specified. Mobil 1 V-Twin 20W-50 is formulated to help offer outstanding protection in 4-cycle, V-Twin type engines, particularly those which are air cooled and tend to run hotter than other types of engines.
Mobil 1 Racing 4T 10W-40 and Mobil 1 V-Twin 20W-50 are recommended for 4-cycle, motorcycles which specify the use of a 10W-40 or a 20W-50 engine oil, respectively. These products will help provide excellent performance in motorcycle engines that are designed with a common engine/transmission lubrication system or where the engine lubrication system is separate from the transmission system. In the case of the latter, follow the manufacturer's recommendation for the type of fluid to be used in the transmission. Mobil 1 Racing 4T 10W-40 and Mobil 1 V-Twin 20W-50 engine oils are designed to help provide the proper frictional characteristics necessary for wet-clutch common engine/transmission systems. They have been fully tested, both on laboratory dynamometers and in the field, to help provide optimum horsepower and acceleration.
|Mobil 1 Motorcycle Oils meet or exceed the requirements of:||Racing 4T||V-Twin|
|According to ExxonMobil, product(s) is of the following quality level:|
|Mobil 1 Motorcycle Oils||Racing 4T||V-Twin|
|Service Classification||API SM,SL, SJ,SH,CF,JASO MA||API SJ,CF|
|Density, g/ml @ 15.6°C (ASTM D4052)||0.86||0.87|
|Flash Point, °C (ASTM D93),||212||214|
|Pour Point,°C (ASTM D97)||-45||-42|
|Kinematic Viscosity, cSt @ 40°C (ASTM D445)||82.0||172.3|
|Kinematic Viscosity, cSt @ 100°C (ASTM D445)||13.1||20.8|
|Cold Cranking, cP (ASTM D5293)||4,640 @ -25°C||7,500 @ -15°C|
|Pumping, cP (ASTM D4684)||11,700 @ -30°C||14,000 @ -20°C|
Based on available toxicological information, it has been determined that these products pose no significant health risk when used and handled properly. Information on use and handling, as well as health and safety information, can be found in the Material Safety Data Sheets which can be obtained from your local distributor; via the Internet on http://www.mobil.com.
For additional technical information or to identify the nearest U.S. Mobil supply source, call 1-800-662-4525.
Mobil , Mobil 1 and the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.