PrintFind a PDSFind a MSDS

Mobil Delvac Synthetic Gear Oil 75W-90, 80W-140

Supreme Performance Commercial Gear Lubricants

Product Description

Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 are synthetic drivetrain lubricants engineered to meet the most demanding extended drain and warranty requirements. These products are designed for use in heavy-duty drivetrains that require gear lubricants with relatively high viscosity and excellent load-carrying capability and where extreme pressures and shock loading are expected. Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 incorporate the latest technology in synthetic basestocks and advanced additives providing significant advantages over mineral gear oils.

The state-of-the-art technology in Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 delivers unsurpassed performance for low and high temperature application, protection against thermal degradation and oxidation, reduced wear and corrosion, improved shear stability, extended service capability, and excellent fuel economy. These products meet or exceed the requirements of API service MT-1/GL-5 EP gear oil service classification and are recommended by ExxonMobil for use in applications requiring the MIL-PRF-2105E specification. 

The outstanding performance of this product is confirmed by its approval for final drives covered by Eaton Roadranger (E500) and ArvinMeritor Extended Warranties of 750,000 miles, with extended oil drains of 500,000 miles. They are also approved by Mack against GO-J Plus (75W-90) and GO-J (80W-140) extended service classifications.

 

Features and Benefits

Today’s technology has vastly improved the performance capabilities of heavy-duty on and off-highway equipment load, torque, speed, and control through innovative drivetrain designs. These designs have changed and increased the requirements of lubricants to deliver this higher level of performance, increase productivity, and reduce operating costs. For heavy-duty final drives, friction control, wear protection, thermal stability, shear stability, rust and corrosion prevention, and seal protection are features that must be optimally balanced to provide extended gear and seal life, smooth operation, improved fuel economy and high load high torque capability over a wide range of applications. The key benefits of Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 include:

FeaturesAdvantages and Potential Benefits
Exceptional thermal stability and resistance to high temperature oxidationExtended gear and bearing life due to minimal deposits
Longer seal life
Outstanding protection against low speed/high torque wear and high speed scoringIncreased load-carrying capability.
Reduced maintenance costs and longer equipment life
Exceptional shear stabilityRetains viscosity and film strength under severe operating conditions to prevent wear
Excellent rust, staining, and corrosion protection of copper and its alloysReduced wear and longer component life
Enhanced friction reduction propertiesImproved fuel economy and reduced operating costs
Outstanding low temperature fluidity versus mineral oilsReduced wear and ease of start-up
Good resistance to foamingMaintains film strength for reliable lubrication
Compatible with typical automotive seals and gasketsMinimum leakage and reduced contamination

 

Applications

      Recommended by ExxonMobil for use in:

 

Specifications and Approvals

Mobil Delvac Synthetic Gear Oil meets or exceeds the requirements of the following industry and builder specifications:75W-9080W-140
API GL-5/MT-1XX
SAE J2360XX
Scania STO 1:0XX
ZF TE-ML 07A/08X 

 

Mobil Delvac Synthetic Gear Oil has the following builder approvals:75W-9080W-140
Dana SHAES 429XX
DANA SHAES 256 Rev. CX 
Mack GO-J PLUSX 
Mack GO-J X
ArvinMeritor O-76NXX
MB-Approval 235.8X 
International TMS-6816XX
ZF TE-ML 05B/12B/16F/19C/21BXX
ZF TE-ML 17BX 
MAN 342 Typ M2X 
Voith Turbo 3.325-340 / 3.325-342X 
Flender BA 7302 Table R1X 

 

Mobil Delvac Synthetic Gear Oil is recommended by ExxonMobil for use in applications requiring:75W-9080W-140
DANA SHAES 256 Rev. A X

 

Mobil Delvac Synthetic Gear Oil has is of quality level, but not approved:75W-9080W-140
MIL-PRF 2105EXX

 

Typical Properties

Mobil Delvac Synthetic Gear Oil75W-9080W-140
SAE Grade75W-9080W-140
Viscosity, ASTM D 445  
cSt @ 40ºC120310
cSt @ 100ºC15.931.2
Viscosity Index, ASTM D 2270140139
Pour Point, ºC, ASTM D 97-48-36
Flash Point, ºC, ASTM D 92205210
Density @ 15ºC kg/l, ASTM D 40520.8590.870

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design and Delvac are trademarks of ExxonMobil Corporation, or one of its subsidiaries. 

7-2011 

Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.