Mobil Hydraulic 10W is a high performance hydraulic oil formulated from advanced base oils and a balanced additive system designed to satisfy a wide range of heavy-duty hydraulic equipment requirements. This product is specifically engineered using an effective balance of ashless dispersants and metallic detergents combined with inhibitors to control oxidation, wear, corrosion and rust. Mobil Hydraulic 10W is used in a wide range of on and off-highway hydraulic applications.
Mobil Hydraulic Oil 10W shares a common formulation with Essolube Hydraulic Oil 10W.
Mobil Hydraulic 10W delivers excellent performance in a wide range of hydraulic systems and components using various multi-metal designs. The product also provides effective low and high ambient temperature performance due to high viscosity index. Its' excellent oxidation resistance delivers good performance at higher temperatures and extended operating intervals. High levels of anti-wear protection result in extended equipment life and fewer breakdowns. Mobil Hydraulic 10W is compatible with other engine oils in case of unplanned mixtures. The key benefits include:
|Features||Advantages and Potential Benefits|
|Good protection against oil thickening, high temperature deposits, varnish, and oil degradation||Clean hydraulic systems
Less wear especially in vanes and control valves
Protects against vane sticking
Extends drain intervals with oil analysis
|Good anti-wear protection||Reduces premature wear and extends equipment life|
|Wide temperature range performance||Reduces wear at cold start-up temperatures
Effective lubrication film strength at high temperatures
|Protects against rust and corrosion||Long equipment life and lower maintenance costs|
Recommended by ExxonMobil for use in:
|Mobil Hydraulic 10W is recommended by ExxonMobil for use in applications requiring:|
|Mobil Hydraulic 10W|
|Viscosity, ASTM D 445|
|cSt @ 40ºC||37.7|
|cSt @ 100ºC||6.1|
|Viscosity Index, ASTM D 2270||107|
|Sulfated Ash, wt%, ASTM D 874||0.5|
|Total Base #, mg KOH/g, ASTM D 2896||4.0|
|Pour Point, ºC, ASTM D 97||-30|
|Flash Point, ºC, ASTM D 92||232|
|Density @ 15ºC kg/l, ASTM D 4052||0.877|
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype and Pegasus design are trademarks of ExxonMobil Corporation, or one of its subsidiaries.
Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.