Search Find an MSDS
Mobil 1 High Mileage Oils Pdf
Fully Synthetic Engine Oils Print View
Product DescriptionFeatures and BenefitsApplicationsSpecifications and ApprovalsTypical PropertiesHealth and Safety 

Product Description

Mobil 1 High Mileage oils are designed to maximize engine performance and help extend the engine life of vehicles with over 75,000 miles.



Features and Benefits

Mobil 1 High Mileage oils are made with a proprietary blend of high performance synthetic basestocks fortified with an additive system designed especially for higher mileage vehicles. Mobil 1 High Mileage oils are especially recommended for high mileage vehicles even those that have used lower quality conventional oils. (Note 1)

Note 1 -- If your engine has excessive sludge deposits due to less-than-adequate maintenance practices, Mobil 1 High Mileage can help by reducing the sludge left behind by conventional oils. For severe cases of sludge, short oil change intervals (3000 - 5000 miles) are recommended for the first 2-3 oil changes as reduction of the sludge takes place. In cases of engine damage that may have resulted from poor maintenance, even Mobil 1 cannot remedy years of neglect. 




Features

Advantages and Potential Benefits
Fully synthetic formula with SuperSyn Technology Excellent overall lubrication and wear protection. Outperforms conventional high mileage oils.
Extra anti-wear additive Helps protect critical engine parts in higher mileage engines
Extra cleaning additive Helps Reduce the sludge and deposits that conventional oils can leave behind
Seal Conditioner Helps prevent leaks

Applications

Mobil 1 High Mileage oils are recommended for vehicles with over 75,000 miles including all types of modern gasoline engines found in passenger cars, SUVs, light vans and trucks.

  • Mobil 1 High Mileage oils are suitable for all types of severe driving applications including high speed highway and stop and go city driving.
  • Mobil 1 High Mileage is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.


 
Back to Top

Specifications and Approvals

Mobil 1 High Mileage oils meet or exceed the following industry specifications:

10W-30       

10W-40
ACEA A3/B3, A3/B4 
API A3/B3,A3/B4 SL,SJ,CF SL,SJ,CF


Typical Properties


10W-30   

10W-40   
SAE Grade  
Viscosity, ASTM D 445   
cSt @ 40º C 78.2 98.16
cSt @ 100º C 11.79 14.71
Viscosity Index, ASTM D 2270 145 156
Sulfated Ash, wt%, ASTM D 874 1.31 1.36
HTHS Viscosity, mPa•s @ 150ºC ASTM D 4683 3.66 4.06
Pour Point, ºC, ASTM D 97 -54 -39
Flash Point, ºC, ASTM D 92 231 240
Density @15º C kg/l, ASTM D 4052 0.865 0.867




  Back to Top

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design,and Mobil 1, are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.



Exxon Mobil Corporation
3225 Gallows Road
Fairfax, VA 22037
1-800-ASK MOBIL (275-6624)

Due to continual product research and development, the information contained herein is subject to change without notification.
Typical Properties may vary slightly.  This product data sheet is based on global product data sheets for use with products purchased in the U.S.
© 2007 Exxon Mobil Corporation.  All rights reserved.
  ExxonMobil Home   |    Help   |    Sitemap   |    Contact Us   |    Privacy & Legal