PrintFind a PDSFind a MSDS

Mobil 1™ High Mileage Oils

Advanced Full Synthetic Engine Oils

Product Description

Mobil 1™ High Mileage oils are designed to help maximize engine performance and extend the engine life of vehicles with over 75,000 miles.

Mobil 1 High Mileage is available in four viscosity grades 5W-20, 5W-30, 10W-30 and 10W-40.

 

Features and Potential Benefits

Mobil 1 High Mileage oils are made with a proprietary blend of high performance synthetic basestocks fortified with an additive system designed especially for higher mileage vehicles. Mobil 1 High Mileage oils are especially recommended for high mileage vehicles even those that have used lower quality conventional oils. (Note 1)

Note 1 -- If your engine has excessive sludge deposits due to less-than-adequate maintenance practices, Mobil 1 High Mileage can help by reducing the sludge left behind in your engine. For severe cases of sludge, short oil change intervals (3000 - 5000 miles) are recommended for the first 2-3 oil changes as reduction of the sludge takes place. In cases of engine damage that may have resulted from poor maintenance, even Mobil 1 cannot remedy years of neglect. 

FeaturesAdvantages and Potential Benefits
Advanced Full synthetic formulaExcellent overall lubrication and wear protection. Outperforms our conventional high mileage oils.
Extra anti-wear additiveHelps to protect critical engine parts in higher mileage engines
Extra cleaning additiveHelps to reduce the sludge and deposits that conventional oils can leave behind
Seal ConditionerHelps to prevent leaks

 

Applications

Mobil 1 High Mileage oils are recommended for vehicles with over 75,000 miles including all types of modern gasoline engines found in passenger cars, SUVs, light vans and trucks.

 

Specifications and Approvals

Mobil 1 High Mileage oils meet or exceed the requirements of:5W-205W-30       10W-30       10W-40
ACEAA1/B1A1/B1A3/B3A3/B3
APISLSLSLSN, SM, SL

 

According to ExxonMobil, Mobil 1 High Mileage is of the following quality level:5W-205W-30       10W-30       10W-40
APICFCFCFCF

 

Typical Properties

 5W-205W-3010W-30   10W-40   
SAE Grade    
Viscosity (ASTM D445)    
cSt @ 40 ºC50.169.278.195.9
cSt @ 100 ºC8.611.71214.71
Viscosity Index150165149160
HTHS Viscosity, mPa•s @ 150 ºC (ASTM D4683)2.73.33.53.9
Pour Point, ºC, (ASTM D97)-42-39-37-33
Flash Point, ºC,  (ASTM D92)244230232232
Density @15.6 ºC g/ml (ASTM D4052)0.8560.8560.8610.860

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


Mobil , Mobil 1 and the Pegasus design are trademarks of Exxon Mobil Corporation, or one of its subsidiaries. 

12-2014 

Copyright © 2001-2014 Exxon Mobil Corporation. All rights reserved.