Mobil Delvac 1™ 5W-40
Mobil commercial-vehicle-lube , 中国
Product Description
Mobil Delvac 1™ 5W-40 is a fully synthetic high performance heavy duty diesel engine oil that helps towards long engine life while providing long drain capability for modern diesel engines operating in severe applications. Mobil Delvac 1 5W-40 delivers excellent performance in modern low emission engines, including refrigerated units, as well as older, well-maintained engines. Mobil Delvac 1 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in the on-road transport and off-road mining, construction, and agricultural industries. Mobil Delvac 1 also meets the requirements of the API SL specification for gasoline engines used in mixed fleets.
The excellent performance of Mobil Delvac 1 5W-40 is the result of extensive cooperative development work with major equipment builders and application of advanced lubrication technology. As a result, this product meets or exceeds demanding specifications of major OEMs.
Features and Benefits
Many modern, low emission diesel engines generate more soot and operate at higher temperatures than older engines. This significantly increases the need for high performance lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher, bringing the oil film closer to the combustion chamber and exposing the lubricant to severe thermal stresses. Mobil Delvac 1 5W-40 maintains outstanding performance at high temperatures. It is also fully compatible with conventional oils. The key benefits include:
Features |
Advantages and Potential Benefits |
Meets or exceeds demanding specifications of major OEMs |
One engine oil for mixed fleet operations |
Outstanding thermal and oxidation stability |
Control of low temperature sludge build-up and high temperature deposits |
Low volatility, excellent wear and bore polish control |
Good oil consumption control |
Expertly formulated low viscosity formulation |
Fuel economy potential1 |
Exceptional low temperature pumpability |
Easier engine start-up and reduced wear |
Good resistance to corrosion |
Helps towards long life of critical wear surfaces |
Long drain capability |
Help towards operational efficiency and overall cost control |
Component compatibility |
Long gasket and seal life, extended service intervals |
1Relative to conventional 15W-40 engine oil. Actual fuel economy improvement is dependent on vehicle/equipment type, outside temperature, driving conditions and your current fluid viscosity
Applications
Mobil Delvac 1 5W-40 is recommended for use in high performance diesel applications, including modern low emission engine designs with Exhaust Gas Recirculation (EGR). These applications include the following:
• On-highway engines operating in both high speed/high load and stop-and-go conditions
• Off-highway engines operating in severe low speed/heavy load conditions
• Refrigeration units
Specifications and Approvals
This product has the following approvals: |
Detroit Fluids Specification 93K214 |
Mack EO-N |
Mack EO-N Premium Plus 03 |
MB-Approval 228.5 |
RENAULT TRUCKS RLD-2 |
VOLVO VDS-2 |
VOLVO VDS-3 |
This product is recommended for use in applications requiring: |
ACEA E3 |
ACEA E5 |
API CF |
API CF-4 |
API CG-4 |
Caterpillar ECF-1-a |
Cummins CES 20071 |
Cummins CES 20072 |
CUMMINS CES 20075 |
Detroit 7SE 270 (4-STROKE CYCLE) |
Mack EO-M |
Mack EO-N Premium Plus |
This product meets or exceeds the requirements of: |
API CH-4 |
API CI-4 |
API CI-4 PLUS |
API SJ |
API SL |
ACEA E4-16 |
ACEA E7-16 |
CUMMINS CES 20076 |
Cummins CES 20077 |
Cummins CES 20078 |
Ford WSS-M2C171-D |
GLOBAL DHD-1 |
ISUZU DEO (w/o DPD Equipped Vehicles) |
RENAULT TRUCKS RXD |
Properties and Specifications
Property |
|
Grade |
SAE 5W-40 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
14.8 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
102 |
Total Base Number, mgKOH/g, ASTM D4739 |
12 |
Ash, Sulfated, mass%, ASTM D874 |
1.4 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
226 |
Viscosity Index, ASTM D2270 |
151 |
Pour Point, °C, ASTM D97 |
-45 |
Specific Gravity, 15.6 C/15.6 C, ASTM D4052 |
0.854 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2023