Mobil Pegasus™ 610  

Mobil Industrial, United States

GAS ENGINE OIL

Product Description

Mobil Pegasus™ 610 is a high performance natural gas engine oil primarily intended for the lubrication of modern medium and high speed four-cycle engines operating on fuel that contains corrosive materials such as hydrogen sulphide or halogens (compounds containing chlorine, fluorine, etc.). These engines are generally of the lean-burn design where increased manifold pressures prevent sufficient lubricant from reaching the valve guide areas resulting in low oil consumption which can lead to accelerated valve guide and valve recession. This effect also increases the potential for wear and acid attack of upper cylinder components from the acidic materials generated during combustion. Mobil Pegasus 610 is a high TBN gas engine oil with exceptional reserve alkalinity designed to offset the negative effects of these corrosive materials on engine components. The excellent corrosion protection properties help to prevent wear in cylinders, valve areas and bearings which can result in longer engine life and lower maintenance costs. Mobil Pegasus 610 provides excellent anti-wear and anti-scuff performance assuring minimal piston scuffing, scoring and cylinder and ring wear. This oil can also be used for the lubrication of the reciprocating compressors in landfill and biomass gas applications.

Mobil Pegasus 610 is formulated from high quality mineral base oils combined with an advanced technology additive system designed to provide excellent protection of engine and compressor components. This product exhibits a high level of chemical stability and resistance to oxidation and nitration. Mobil Pegasus 610 offers outstanding resistance to valve train wear and protection against deposit and sludge formation. These performance advantages combined with the very effective detergency and dispersancy characteristics control the formation of ash and carbon deposits that could result in poor engine performance and detonation induced pre-ignition.

 

Features and Benefits

Mobil Pegasus 610 Gas Engine Oil provides an additional margin of protection in those applications using contaminated fuel. Its excellent detergent / dispersant technology also results in cleaner engines, lower wear rates and improved engine performance. The use of this product can result in reduced maintenance costs and improved production capacity. Its excellent chemical and oxidation stability can result in longer drain periods and reduced filter costs. The high reserve alkalinity of this product allows its use in engines operating on fuels with moderate amounts of corrosive materials in the fuel gas.

 

Features

Advantages and Potential Benefits

High TBN and Reserve Alkalinity

Controls wear and corrosion when using contaminated gas

Protects valve seats and faces on four-cycle engines

Controls combustion chamber ash formation and improves spark plug performance

Outstanding Anti-wear and Anti-scuff Properties

Lower wear of engine components

Reduced scuffing of liners in highly loaded gas engines

Provides excellent break-in protection

Excellent Oxidation and Chemical Stability

Cleaner engines

Extended oil drain intervals

Reduced oil filter costs

Excellent resistance to oxidation and nitration

Effective Corrosion Resistance

Reduces valve guide wear in four-cycle gas engines

Protects bearings and internal components

Exceptional Detergent / Dispersant Properties

Neutralises formation of acids in the oil

Protection of upper cylinder and valve train components

Cleaner engines

Longer oil filter life

Non-zinc and Non-Phosphorus Formulation

Extend catalytic converter life and performance

 

Applications

Note : Engines operating on fuel gas with elevated levels of sulphur or chlorine compounds should also have coolant (jacket water) and oil temperatures raised.

 

     •  Gas engines operating on fuel that contains moderate levels of hydrogen sulphide (H2S)

     •  Engines operating on fuel containing other corrosive components such as TOHCl (Total Organic Halides as Chloride)

     •  Spark ignited four-stroke cycle gas engines with very low oil consumption

     •  Reciprocating compressors operating on natural gas that contains sulphur or halogens

     •  High output or naturally aspirated engines operating at or in excess of rated capacity under high temperatures

 

Specifications and Approvals

This product has the following approvals:

GE Waukesha Engine Landfill Gas Applications

 

Properties and Specifications

Property

Grade

SAE 40

Ash, Sulfated, mass%, ASTM D874

1

Flash Point, Cleveland Open Cup, °C, ASTM D92

264

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13.8

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

130

Pour Point, °C, ASTM D97

-18

Total Base Number, mgKOH/g, ASTM D2896

8.6

Viscosity Index, ASTM D2270

102

Density 15 C, kg/L, CALCULATED

0.89

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2019


Exxon Mobil Corporation
22777 Springwoods Village Parkway
Spring TX 77389

1-800-ASK MOBIL (275-6624)

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.

Loading