MOBIL DELVAC MODERN 10W-40 FULL PROTECTION
Mobil commercial-vehicle-lube , Argentina
Product Description
MOBIL DELVAC MODERN 10W-40 FULL PROTECTION is an extra high performance synthetic technology diesel engine oil that helps extend engine life in the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Exhaust Gas Recirculation (EGR) and Aftertreatment Systems with Diesel Particulate Filters (DPFs) and Diesel Oxidation Catalysts (DOCs). Fully backwards compatible, MOBIL DELVAC MODERN 10W-40 FULL PROTECTION will also deliver the same exceptional performance in older conventional engines. It meets or exceeds the requirements of the API CK-4, CJ-4 service categories as well as key Original Equipment Manufacturer (OEM) requirements.
Features and Benefits
MOBIL DELVAC MODERN 10W-40 FULL PROTECTION is formulated using synthetic technology and a detergent system to deliver excellent performance in both new and older engines. In addition to assuring excellent control of oil thickening due to soot build-up and TBN retention for long drain intervals, MOBIL DELVAC MODERN 10W-40 FULL PROTECTION advanced technology also provides outstanding resistance to oil consumption, oxidation, corrosive and abrasive wear, and high temperature deposits.
Features |
Advantages and Potential Benefits |
Excellent soot-viscosity control |
Helps to maintain engine efficiency, long engine life and long oil life |
Outstanding thermal and oxidative stability |
Helps to reduce low temperature sludge build-up and high temperature deposits |
Excellent oil consumption control |
Helps to lower oil costs due to less make-up oil during operation |
Excellent TBN reserves |
Helps to improve corrosion protection and to extend drain intervals |
Stay-in-grade shear stability |
Helps to maintain viscosity in severe, high temperature service for greater wear protection and long engine life |
Excellent low temperature pumpability |
Fast oil flow and helps to reduce wear during engine start-up in low temperatures |
Excellent resistance to corrosive and abrasive wear |
Long life of critical wear surfaces |
Component compatibility |
Long gasket, seal, and after treatment (DPF and DOC) life |
Applications
Recommended by ExxonMobil for use in:
• Heavy Duty Diesel Engines including Euro V/VI and China V/VI(1) modern low emissions vehicles, utilizing technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR).
• High-performance diesel applications including turbo-charged designs featuring EGR Technology and diesel applications using older, naturally aspirated conventional designs.
• On-highway heavy-duty trucking and off-highway including: construction, mining, quarrying, and agriculture.
Specifications and Approvals
This product has the following approvals: |
Detroit Detroit Fluids Specification 93K222 |
Detroit Fluids Specification 93K218 |
MACK EOS-4.5 |
RENAULT TRUCKS RLD-3 |
VOLVO VDS-4.5 |
Cummins CES 20086 |
Cummins CES 20081 |
MAN M 3775 |
Ford WSS-M2C171-F1 |
MTU Oil Category 2.1 |
DTFR 15C100 |
This product is recommended for use in applications requiring: |
MAN M 3575 |
This product meets or exceeds the requirements of: |
API CJ-4 |
API CK-4 |
API SN |
Caterpillar ECF-3 |
ACEA E7 |
ACEA E11 |
Properties and Specifications
Property |
|
Grade |
SAE 10W-40 |
Viscosity Index, ASTM D2270 |
158 |
Total Base Number, mgKOH/g, ASTM D2896 |
10 |
Pour Point, °C, ASTM D97 |
-48 |
Noack Volatility, mass%, ASTM D5800 |
10 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
14.11 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
219 |
Density @ 15.6 C, g/ml, ASTM D1298 |
0.862 |
Ash, Sulfated, mass%, ASTM D874 |
0.69 |
Appearance, AMS 1738 |
Clear and Bright |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
10-2024