Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze

Mobil commercial-vehicle-lube , Argentina

SCA PRECHARGED Coolant/Antifreeze

Product Description

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze is a concentrated antifreeze, coolant and anticorrosive suitable for combustion engines based on ethylene glycols with corrosion inhibitors that needs to be diluted with distilled water prior to use.

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze is fully formulated and does not require SCA aggregate.

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze protects the engine from corrosion, overheating and freezing. Effectively protects engines against corrosion in vital parts such as tanks, coolant channels in the block, radiator and water pump. Contains low silicate content.

Features and Benefits

No initial SCA precharge required

• Effective corrosion protection for aluminum, brass, cast iron, colder, steel and copper

• Contains nitrite for excellent pitting protection for wet sleeve cylinder liners

• Inhibitor system helps reduce drop-out, gel and scale

• Compatible with heavy-duty diesel SCAs (no initial precharge needed) and cooling system filters

• Universal low silicate formula helps reduce deposits

Applications

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze is recommended for use in:

• On-road and off-road heavy-duty diesel and gasoline engines

• Mixed fleets where both light-duty and heavy-duty vehicles are present

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze must be mixed with water. Use in a 50/50 ratio is generally recommended. To prepare the solution, the use of distilled or deionized water is recommended.

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze meets the requirements of the following standards:

- ASTM D 3306

- ASTM D 4340

- ASTM D 4985

- ASTM D 6210

- Cummins 14603

- Caterpillar

- Chrysler MS7170 Sec. A y B 1-4 X

- GM 1825M GM 1899M

- Ford ESE-M97B44-A Sec. 3.1.1 y 3.1.2

- Detroit Diesel 7SE298

- Freightliner 48-22880

- John Deere H24A1, H24C1

- Camiones Mack

- MTU

- Navistar B1

- TMC RP 329

- Camiones pesados Volvo-GM

Properties and Specifications

Protection Table

Concentration	Protects from freezing down to
33	-18 ° C
40	-25 ° C
50	-37 ° C
60	-49 ° C

Chemical Properties

Property	ASTM Test Method	Typical Values
Boiling Point	ASTM D1120	>165° C
Reserve Alkalinity	ASTM D1121	12.9 ml
Water	ASTM D1123	<5 wt %
Color	Visual	Violet
pH (50 % vol in distilled water)	ASTM D1287	9.2
Freeze Point (50 % volume)	ASTM D3321	-37 ° C
Density @ 15 C	ASTM D1122	1.12 g/ml

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

03-2025

Cosan Lubricantes S.R.L.

Av. Libertador 6343, Piso 8
CABA, CP 1498, Buenos Aires – Argentina

0800 345 79540

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.