Mobil™ Compressor Oil 150 IR
Mobil industrial , Australia
Gas Compressor Cylinder Lubricant
MobilCompressor Oil 150 IR is a premium quality compounded lubricant specially developed for cylinder lubrication of gas compressors. Compressor Oil 150 IR is recommended by ExxonMobil for use in reciprocating compressors with separate cylinder lubrication systems operating on natural gas or other hydrocarbon gases. Mobil Compressor Oil 150 IR is formulated from high quality mineral base oil and selected additives to give excellent thermal and oxidative stability helping to minimize harmful carbon deposit formation on exhaust valves, pistons, rods and packings. This lubricant also has excellent film strength that resists wash-off by wet gases or hydrocarbons in the gas which may condense during compression.
Features and Benefits
The use of the Mobil Compressor Oil 150 IR can result in cleaner compressors and lower deposits compared to conventional mineral oils, resulting in longer running periods between maintenance intervals. This product’s excellent oxidation and thermal stability safely allow extended life capability while controlling sludge and deposit formation. It possesses outstanding anti-wear and corrosion protection, which enhances equipment life and performance.
|Features||Advantages and Potential Benefits|
|Low Carbon Deposit Formation||Helps improve valve response and performance|
|Helps reduce deposits in discharge lines|
|Helps extend equipment life and contributes to reduced maintenance costs|
|ExcellentOxidation and Thermal Stability||Long oil life|
|Helps improve filter life and lower maintenance costs|
|Helps reduce deposit formation|
|Excellent Wear Protection||Provides effective lubricating film helping to reduce wear of rings, cylinders, bearings and gears|
|Excellent Water Resistance||Resists wash off by wet gases, helping to maintain equipment lubrication and protection|
|Effective Rust and Corrosion Protection||Helps improve protection of valves and reduce wear of rings and cylinders|
Recommended for cylinder lubrication in reciprocating compressors with separate cylinder lubrication systems operating on natural gas or other hydrocarbon gases. Suitable for use over a wide range of operating temperatures typically found in an oil and gas production environment.
|Mobil Compressor Oil 150 IR|
|Density @ 15°C, Kg/l (ASTM D 4052)||0.8959|
|Foam Test (ASTM D 892, Seq I)||0/0|
|Viscosity cSt @100°C (ASTM D 445)||16.4|
|Zn-content (ASTM D 4951)||0.03|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.09-2019