Mobil DTE™ PM Series

Mobil industrial , Australia

Paper Machine Lubricants

Product Description

Mobil DTE™ PM Series products are high-quality, high-performance lubricants specifically designed for demanding industrial paper machine circulating systems. They are engineered to provide exceptional lubrication qualities while protecting system components from rust and corrosion. This is particularly important in the wet-end where water and chemical contaminants can enter the lubrication system. The Mobil DTE PM Series oils are formulated to provide maximum protection of gears and bearings operating under severe conditions. They exhibit good viscosity characteristics allowing reduced start-up to production times while maintaining excellent viscosity characteristics at high temperatures. The DTE PM Series oils provide excellent resistance to oxidation and thermal degradation, exceptional protection against rust and corrosion, and a high level of anti-wear performance.

 

Mobil DTE PM Series oils are formulated with select high-quality base oils and a proprietary advanced technology additive system carefully balanced to attain high performance standards. These fluids permit the use of high steam pressures, temperatures and machine speeds common in high output paper machines. Their outstanding demulsibility and filterability assure excellent performance in the presence of water and the ability to retain effective filtration even at very fine filtration levels. They readily separate water and retain their colour characteristics for extended periods of operation.

 

Features and Benefits

The Mobil DTE PM Series oils have proven their performance capabilities in modern high-output paper machine lubrication. Their excellent performance properties in the areas of wear protection, enhanced oxidation stability, chemical stability, effective rust and corrosion protection, colour stability, and filterability help to extend maintenance service intervals. This results in less required maintenance, longer equipment life and increased production capacity.

 

Features

Advantages and Potential Benefits

Exceptional Wear Protection

Improved bearing and gear performance

Outstanding Oxidation and Thermal Stability

Longer oil life

 

Lower filter replacement costs

 

Cleaner systems

 

Reduced system deposits

Effective Water Separation Properties

Allows easier removal of water

 

Reduces formation of emulsions in systems

Good Anti-Fatigue Performance

Reduces fatigue failures of bearings and gears

Excellent Filterability

Keeps oil lines and flow control mechanisms free of deposits

 

Improved oil flow and cooling performance

 

Lowers filter replacement costs

High Level Rust and Corrosion Protection

Protects gears and bearings in wet environments

 

Provides protection against corrosion in a wet and humid environment

 

Applications

     •  Lubrication of industrial paper machine circulating systems

     •  Application involving circulation systems operating over a wide temperature range

     •  Systems that must be started and brought on line quickly

     •  Circulation systems' lubricating gears and bearings

 

Properties and Specifications

Property

100

150

220

320

Grade

ISO 100

ISO 150

ISO 220

ISO 320

Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130

1A

1A

1A

1A

Emulsion, Time to 3 mL Emulsion, 82 C, min, ASTM D1401

10

20

20

20

FZG 4-Square Load Support, Fail Stage, DIN 51354

12

12

Flash Point, Cleveland Open Cup, °C, ASTM D92

240

250

260

250

Foam, Sequence I, Stability, ml, ASTM D892

0

0

0

0

Foam, Sequence I, Tendency, ml, ASTM D892

0

10

10

10

Foam, Sequence II, Stability, ml, ASTM D892

0

0

0

0

Foam, Sequence II, Tendency, ml, ASTM D892

40

30

30

30

Foam, Sequence III, Stability, ml, ASTM D892

0

0

0

0

Foam, Sequence III, Tendency, ml, ASTM D892

0

10

10

10

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

11.4

14.7

19

25.4

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

100

150

220

320

Pour Point, °C, ASTM D97

-6

-6

-6

-6

Rust Characteristics, Procedure A, ASTM D665

Pass

Pass

Pass

Pass

Rust Characteristics, Procedure B, ASTM D665

Pass

Pass

Pass

Pass

Specific Gravity, 15.6 C/15.6 C, ASTM D1298

0.884

0.888

0.889

0.892

Viscosity Index, ASTM D2270

95

95

95

95

 

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

04-2024

Mobil Oil Australia Pty Ltd
A.B.N. 88 004 052 984
12 Riverside Quay
Southbank Vic 3006
+61 3 8633 8444
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.