Mobil 1™ FS X2 5W-40

Mobil passenger-vehicle-lube , Australia

Advanced Full Synthetic Motor Oil

Product Description

Mobil 1™ FS X2 5W-40 European Car Formula is an advanced full synthetic motor oil engineered for the latest gasoline and diesel (without DPFs) engine technology delivering excellent all-around performance. It provides exceptional cleaning power, wear protection and overall performance.

 

Features and Benefits

Mobil 1 FS X2 5W-40 is made with a proprietary blend of ultra-high performance synthetic basestocks fortified with a precisely balanced component system.

 

Features

Advantages and Potential Benefits

Outstanding thermal and oxidation stability

Helps to resist oil aging allowing extended drain interval protection

Excellent low temperature capabilities

Outstanding cold starting and fast lubrication to protect against wear

Active cleaning agents

Designed to clean up sludge left behind in your engine

Low oil volatility

Helps reduce oil consumption

High viscosity index

Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe

 

Applications

Mobil 1 FS X2 5W-40 is recommended by ExxonMobil for all types of vehicles, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks.

 

• Mobil 1 FS X2 5W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

 

Always check your owner's manual for the manufacturer's recommended oil viscosity grade, API service classification and any builder approval.

 

Specifications and Approvals

 

This product has the following approvals:

MB-Approval 229.3

Porsche A40

VW 502 00

VW 505 00

 

This product is recommended for use in applications requiring:

API CF

 

This product meets or exceeds the requirements of:

API SN

ACEA A3/B3

ACEA A3/B4

 

Properties and Specifications

Property

Grade

SAE 5W-40

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

13.6

Total Base Number, mgKOH/g, ASTM D2896

12.6

Pour Point, °C, ASTM D97

-45

Density @ 15 C, g/cm3, ASTM D4052

0.849

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

80

Ash, Sulfated, mass%, ASTM D874

1.3

Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683

3.8

Flash Point, Cleveland Open Cup, °C, ASTM D92

227

Mini-Rotary Viscometer, Apparent Viscosity, -35 C, mPa.s, ASTM D4684

17000

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

09-2021

Mobil Oil Australia Pty Ltd
A.B.N. 88 004 052 984
12 Riverside Quay
Southbank Vic 3006
+61 3 8633 8444
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.  Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.  The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com 
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.