Mobil Super™ All-In-One Protection 0W-16

Mobil passenger-vehicle-lube , Australia

Fully Synthetic Engine Oil

Product Description

Mobil Super™ All-In-One Protection 0W-16 is brought to you by the makers of Mobil 1. This full synthetic engine oil is tailored to deliver improved fuel economy and provides outstanding engine wear protection even under the most demanding driving conditions.

Mobil Super™ All-In-One Protection 0W-16 is formulated with Heat Activated Anti-Wear™ molecules technology which provides superior engine protection under high temperature and proven protection for 20 years.*

Mobil Super™ All-In-One Protection 0W-16 is proven during API SQ engines test to reduce damaging Low Speed Pre-Ignition (LSPI) problem in modern engines. This helps to improve engine efficiencies and prolong engine life

Features and Benefits

Mobil Super™ All-In-One Protection 0W-16 is suitable for use in the gasoline and hybrid engines.

Always consult your owner's manual to check recommended viscosity grade and specifications for your particular vehicle.

Applications

• Suitable for gasoline and hybrid engines
• Heat Activated Anti-Wear Molecule provides high temperature wear protection while keeping your engine clean
• Proven protection for 20 years
• Improvement in fuel economy performance
• Fights sludge with active cleaning agents **

*Based on field trail in USA under controlled test conditions with routine oil change. 20 Years is based on annual driving distance 14,850 km. Performance may vary depending on the engine design, fuel, temperature, and actual driving conditions.

** Based on passing Sequence VH engine test.

Specifications and Approvals

This product meets or exceeds the requirements of:
API SP
API SP Resource Conserving
API SQ
API SQ Resource Conserving
ILSAC GF-7B

Properties and Specifications

Property
Grade	SAE 0W-16
Ash, Sulfated, mass%, ASTM D874	0.7
Density @ 15.6 C, g/ml, ASTM D4052	0.841
Flash Point, Cleveland Open Cup, °C, ASTM D92	240
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683	2.3
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445	7
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445	37
Pour Point, °C, ASTM D97	-51
Total Base Number, mgKOH/g, ASTM D2896	7.2
Viscosity Index, ASTM D2270	152
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684	11500

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

10-2026

Mobil Oil Australia Pty Ltd
664 Collins Street,
Docklands, Victoria, 3008,
Australia
1800 105 961 or +61 3 9261 0000
http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.