Mobil Delvac Modern™ Light Commercial F 0W-30
Mobil commercial-vehicle-lube , Azerbaijan
Product Description
Mobil Delvac Modern™ Light Commercial F 0W-30 is an advanced synthetic technology engine oil developed to meet the Ford requirement "WSS-M2C950-A". It is designed to help provide long engine life and outstanding protection for diesel engines operating in severe driving conditions, typically encountered in city operations.
This product is designed for Ford light-duty commercial vehicles but ExxonMobil also recommends it for vans which need to meet requirements of ACEA A5/B5 and ACEA C2.
Features and Benefits
Mobil Delvac Modern Light Commercial F 0W-30 meets the technical requirements according to Ford´s standard WSS-M2C950-A, based on the OEM engine tests.
The usage of this product is meant to provide the following benefits:
- Increased fuel economy 1
- Extended life of diesel particulate filter 2
- Enhanced lower temperature properties 3
1. based on FORD WSS-M2C950-A 0W-30 spec compared to the FORD WSS-M2C913-D 5W-30 oil
2. based on ACEA C2 requirements
3. based on SAE 0W-30 spec compared to SAE 5W-30 oil
Applications
ExxonMobil recommends Mobil Delvac™ Light Commercial Vehicle F 0W-30 for demanding driving conditions:
• Ford Light Commercial Vehicles for engines requiring WSS-M2C950-A
• Light Commercial Vehicles requiring ACEA A5/B5 and ACEA C2
• Normal to occasionally severe operating conditions (including city driving conditions)
Owner's manual should be consulted for recommended viscosity grades and specification.
Specifications and Approvals
|
This product meets or exceeds the requirements of: |
|
ACEA A5/B5 |
|
ACEA C2 |
|
FORD WSS-M2C950-A |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-30 |
|
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
45 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
9.6 |
|
Density @ 15.6 C, g/ml, ASTM D4052 |
0.84 |
|
Total Base Number, mgKOH/g, ASTM D2896 |
8 |
|
Cold-Cranking Simulator, Apparent Viscosity @ -35 C, mPa.s, ASTM D5293 |
5100 |
|
Noack Volatility, mass%, ASTM D5800 |
12 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.77 |
|
Viscosity Index, ASTM D2270 |
204 |
|
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
232 |
|
Pour Point, °C, ASTM D97 |
-42 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspxAll trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
11-2022