Mobil 1™ ESP Formula M 5W-40
Mobil passenger-vehicle-lube , Barbados
Product Description
Mobil 1™ ESP Formula M 5W-40 is an advanced performance synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. Mobil 1 ESP Formula M 5W-40 is engineered to help prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered automobiles that require an oil that is approved against MB 229.51 specification.
Features and Benefits
Mobil 1 ESP Formula M 5W-40 is made with a proprietary blend of high performance components formulated to be fully compatible with the latest Diesel Particulate Filters (DPF's) and Gasoline Catalytic Converters. Mobil 1 ESP Formula M 5W-40 has been designed to help deliver outstanding overall performance and protection. Key features and potential benefits include:
Features |
Advantages and Potential Benefits |
Low Ash Content |
Helps to reduce particulate build up in Diesel Particulate Filters |
Low Sulphur and Phosphorous content |
Helps to reduce poisoning of Gasoline Catalytic Converters |
Active cleaning agents |
Helps to reduce deposits and sludge build-up to enable long and clean engine life |
Outstanding thermal and oxidation stability |
Helps to reduce oil aging allowing extended drain interval protection |
Low oil consumption |
Less hydrocarbon pollution |
Excellent low temperature capabilities |
Quick cold weather starting and ultra fast protection. Also helps extend engine and electrical system life. |
Applications
Mobil 1 ESP Formula M 5W-40 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Specifications and Approvals
This product has the following approvals: |
MB-Approval 229.31 |
MB-Approval 229.51 |
Properties and Specifications
Property |
|
Grade |
SAE 5W-40 |
Ash, Sulfated, mass%, ASTM D874 |
0.6 |
Density @ 15.6 C, g/ml, ASTM D4052 |
0.85 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 |
236 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 |
3.8 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
13.4 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 |
81 |
Pour Point, °C, ASTM D97 |
-39 |
Viscosity Index, ASTM D2270 |
167 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024