MOBILCUT ™250-NEW

Mobil industrial , Belarus

Aqueous Metal Working Fluid

Product Description

Mobilcut is the trademark for Mobil Industrial lubricants line of high performance water miscible metal removal fluids. Formulated with leading edge base oils, additives, and emulsifiers, the Mobilcut series of non-chlorinated products provides dependable performance in a wide array of metal removal processes. The products are designed to work in a variety of hard and soft water qualities and offer low foam potential and long-term corrosion protection for machine and components. Low maintenance and inherently stable, Mobilcut products are designed for the modern machine shop where long service life, excellent machining performance, health and environmental concerns are important factors for increased productivity. These products are supplied in concentrated form and require mixing with water at the point of use. All Mobilcut products are free of formaldehyde release agents (FAD).

Mobilcut 250-New is an amine and boron free high quality micro emulsion water miscible metalworking fluid designed to form a translucent emulsion which is suitable for hard and soft water in a range of 15 - 25°dH and stable in use up to 60°dH. Fluid is designed to minimize skin irritation and provide long operation life at the same time. Particularly suitable for aluminium machining.

 

Features and Benefits

The Mobilcut series are designed to help increase the productivity of modern machine shops by providing high performance features.

Features

Advantages and Potential Benefits

Form stable emulsions and solutions

Ease of use and maintenance

Long term inherent stability

Increases batch life and reduces unpleasant odors

Low foaming potential

Improved performance even in high pressure systems

Resists formation of sticky residues

Improves machine cleanliness

High degree of corrosion protection

Reduces machine maintenance and rework of materials

Good separability from fines

Improves filterability and surface finish

Wide Range of applicability

Potential to consolidate products and reduce inventories

Compatible with high performance Mobil Vactra Oil No slideway lubricants

Easy separation and removal of tramp oil

Neutral Odor

Enhances the workplace environment

 

Applications

Mobilcut 250-New:  micro emulsion cutting fluid is primarily intended for the machining of

aluminum and aluminum alloys. It may also be used on a wide variety of ferrous materials where a more versatile fluid is required.

Fluid type is micro emulsion. Typical mineral oil content is 45%. Optimal water hardness range is from 15 to 25 ° dH. Its refractometer factor is 1.0

 

Recommended concentrations for typical operations:

Low alloy steels - milling, turning: 7-10%

Carbon alloy steels, difficult machining: 7-12%

Aluminum, Aluminium machining: 7-12%

 

Properties and Specifications

Property

 

Appearance, AA.Lab.101

Brown homogeneous turbid liquid

Appearance, 4.0% in 20 deg dH Water, AA.Lab.101

fine disperse, no cream

Kinematic Viscosity @ 20 C, mm2/s, ASTM D7042

215

Density 15 C, kg/m3, DIN EN ISO12185

977

pH-Value 4.0% in 20 deg dH Water, DIN 51369

9.4

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

08-2024