Mobil 1™ Synthetic Grease
Mobil grease , Canada
Product Description
Mobil 1™ Synthetic Grease, the official automotive grease of NASCAR, is an advanced full synthetic grease formulated with a proprietary blend of high-performance synthetic base stocks and a lithium complex soap thickener. The thickener system provides a high dropping point, while additives impart excellent extreme-pressure properties and resistance to water wash, rust and corrosion. The proprietary blend of high-performance synthetic base stocks used in Mobil 1 Synthetic Grease gives reliable lubrication over wide temperature ranges -50 C (-58 F) to 246 C (475 F). Outstanding structural stability coupled with high performance synthetic base stocks make Mobil 1 Synthetic Grease an outstanding all-purpose automotive grease.
Features and Benefits
Features |
Advantages and Potential Benefits |
All-Purpose Automotive Grease |
• Reliable lubrication over wide temperature range -50 C (-58 F) to 246 C (475 F) • 75 % reduction in torque need at -40 F (-40 C) 1 |
Wide Operating Temperature Range |
-40C (-40F) to 150C (302 F) |
Excellent Resistance to Rust and Corrosion |
• Longer life of bearings and chassis lube points when exposed to corrosive environments |
Outstanding Structural Stability |
• Provides effective lubrication over extended periods of time |
Exceptional wear protection under heavy loads |
• 20 % Improved wear protection 2. • Provides bearing protection while cornering and other conditions where bearings temporarily experience heavy loads. |
Excellent resistance to water wash |
• 40% better resistance to water wash out3 from heavy rain storms or exposure to high amounts of water. |
Improved grease bearing life |
• 3X improvement in grease bearing life4 |
Applications
Mobil 1™ Synthetic Grease meets the requirements of the National Lubricating Grease institute (NLGI) performance classification GC-LB. It is recommended for automotive applications at both high and low temperatures. It is particularly suited for applications such as disc brake wheel bearings and ball and steering joints. It will provide outstanding bearing protection under heavy loads at any highway speed, and where moisture or condensation is a factor.
Specifications and Approvals
This product meets or exceeds the requirements of: |
NLGI GC-LB |
Properties and Specifications
Property |
|
Grade |
NLGI 2 |
Thickener Type |
Lithium Complex |
Four-Ball Extreme Pressure Test, Load Wear Index, kgf, ASTM D2596 |
51 |
Corrosion Preventive Properties, Rating, ASTM D1743 |
Pass |
Oil Separation, 0.25 psi, 24 h @ 25 C, mass%, ASTM D1742 |
3 |
Penetration, 60X, 0.1 mm, ASTM D217 |
280 |
Dropping Point, °C, ASTM D2265 |
300 |
Color, Visual |
Red |
Viscosity @ 40 C, Base Oil, mm2/s, ASTM D445 |
150 |
Timken OK Load, lb, ASTM D2509 |
60 |
Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048 |
1B |
Four-Ball Extreme Pressure Test, Weld Point, kgf, ASTM D2596 |
315 |
Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266 |
0.5 |
Water Washout, Loss @ 79 C, wt%, ASTM D1264 |
3 |
Low Temperature Torque, 60 s, -40 C, N m, ASTM D4693 |
1 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
04-2024