Mobil ATF™ 3324

Mobil passenger-vehicle-lube , Canada

Automatic Transmission Fluid

Product Description

Mobil ATF™ 3324 is an exceptionally high performance lubricant that meets original equipment manufacturers' specifications for use in certain slip-controlled lock-up automatic transmissions.

 

Features and Benefits

The unique formulation of Mobil ATF 3324 is designed to provide good fuel economy performance, whilst maintaining excellent lubrication of transmissions in specified slip-controlled lock-up automatic transmissions. These outstanding performance capabilities translate into significant operational benefits, including:

•  Improved fuel economy performance compared to typical higher viscosity ATFs in the market place

•  Excellent lubricating characteristics for quiet operation and smooth shifting in approved transmissions

•  Controlled friction properties for smooth and efficient transmission of power across all normal temperature ranges

•  Helps to control transmission shudder and provide excellent vehicle driveability

•  Helps to extend transmission life based on excellent wear control

•  Long fluid life based on excellent oxidation resistance

•  Excellent viscosity stability (high viscosity index) to help assure adequate lubrication without excessive thinning in severe high-temperature service or thickening at low starting temperatures

•  Resistance to foaming

•  Superb protection against rusting and corrosion

•  Compatibility with synthetic rubber seal materials

 

Applications

Mobil ATF 3324 is designed to meet the service fill requirements for many Japanese designed vehicles, and is recommended for use in transmissions requiring fluids that meet JWS 3324 requirements. Please refer to the owners' manual for proper fluid requirements.

 

Properties and Specifications

Property

Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983

8000

Color, Visual

Red

Density @ 15 C, g/cm3, ASTM D4052

0.854

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445

5.3

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445

23

Viscosity Index, ASTM D2270

173

Flash Point, Cleveland Open Cup, °C, ASTM D92

>175

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.

11-2019

Imperial Oil

Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
C. P. 2480, Station M
Calgary AB T2P 3 M 9

1-800-268-3183

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.